Tracks rubbing tub... No power... What's going

[gokorn1]

I recently put my super tracks back on and loaded my conquest on the trailer and headed out hunting without a test run. I thought it was unusual that I couldn't get any speed(max2-3mph)even in low gear, and the noise was from the rocks and roots on the trail. Well after a few miles I lowered air pressure thinking my tracks were to tight and that was causing my power loss. No difference.. After a few more miles I figured out the noise was the tracks rubbing on the tub. The track guides were running on top of the tire and i would push them down so they would pop over the tire. I played with air pressure with no changes in power or noise. I'm at a loss for what could be causing this.

Last year I ran the tracks with no problems at all. I need up loosing a track in some 4wheeler ruts and came back several miles on one track. I had a lot more power with the one track

[prailleraide]

seems funny but you got your wheel spacer on ? :P

[gokorn1]

Well I reinstalled the track that fell off and all seems a little better now. Strange

[plott hound]

are all your bearings good?i had that trouble with a b-12 bombardier,rear bearings were shot.damn thing would misalingn and walk out of the tracks.