Tweet
Anyone know where to find 1 inch wheel spacers with 7/16 studs? I can only find the 1/2-20 studs and I hate to have to modify my new wheels to make those fit. any suggestions would be great.
-
-
Take a look on ebay there are a few choices on there. -
If I remember correctly, post-Fox body Mustangs with 5 lug wheels have a 5x4.5" bolt pattern, the same as our AATVs, so spacers to fit a Mustang on ebay should be very, very plentiful."Looks like you have a problem with your 4 wheeler........you're missin' two wheels there"
sigpicComment
-
Jeep Cherokee N Grand Cherokee from 90 to 98 are 5x4.5 also.Comment
-
They have any thickness you want...
.
Link is still not working right...
Anyway in the Ebay Motors seaction, search for "5x4.5 +spacer" and a couple thousand spacers come up.
.
The trouble with retirement is.... I never get a day off !!!!
sigpicComment
-
Wranglers and ford rangers also have the same bolt pattern.Originally posted by Nubs View PostComment
-
I used 1/2" stud spacers and drilled the wheelsOriginally posted by johnnova View PostThomas
94 MAX IV, 16 Vanguard, Aqua Torques, 1 1/4" wheel spacersComment
-
Thanks for all the replies. I did see many wheel spacers on Ebay but was unable to find any with 7/16 studs, I am going to call one of the dealers today and see if they can press them in instead of 1/2 studs. all else fails I guess I will use 1/2 studs and drill out my new rims. if I can get the 7/16 ones I will post a part number so others can find it.
ThanksComment
-
Adair Argo sells a 1"spacerComment
-
Thanks Miker89 they are a little more expensive but I wont have to alter my new mudox wheels, here is the link below in case anyone else needs some in the future. there are 4 different options from 1 inch 3 piece spacer and a 1 3/4 to a 2 3/4 wheel extender.
adairargosales - Axle Ext/wheel spacersComment
-
double check, your mudd-ox wheels are probably ready-to-use with 1/2" lug studs.Comment
Comment