Track size for an older 8x8 Argo

[Dieseldoctor]

Looking into buying some used tracks for my old 8x8 Argo HBT that I was recently brought back to life seller says they are 13.5 wide tracks . Will these fit on my machine ? And do I need wheel spacers ?

Thanks !

[olargo]

Length-wise they should fit - it maybe necessary to use a half-segment. Perhaps someone who has first hand experience with an older Argo will chime in. You will not need wheel spacers with the 13.5 inch track.

[ARGOJIM]

Length-wise they should fit - it maybe necessary to use a half-segment. Perhaps someone who has first hand experience with an older Argo will chime in. You will not need wheel spacers with the 13.5 inch track.

Pretty spot on, all older Argo 8x8 pre Frontier and Avenger had 24" centered axles so tires and track/pin wear would be the biggest variations. You will need a 22x10x8 tire ( unless your machine still has the 20x10x8 tires) to fit in the track properly.