New RIM from RI, but its slightly different -

[jshade]

The basics are the same (of course), but my old one is 12x10.5 JA and the one they sent is 12 x 10.0 AT. I know that there is a 1/2 inch difference between the width of the rim and that will make the tire slightly larger around, but will it make that much of a difference?

Any help?

Johney (Durect) Shade

[LarryW]

It wont hurt a thing. Just be sure to use tire inflation by the circumference of the tire and not by the actual psi. The circumference method should be used anyways as even same brand tires do vary in circumference at the same psi. I wouldnt worry about it.