Tweet
Hi just finished rebuilding my argo and doing some test runs around the yard. after doing some laps i looking on the top of the trans there was a couple of tablespoons of trans gear oil sitting on top of the trans that looks like it came from the breather tube/dipstike. i changed the oil during the build and only put about .8 of a quart (from manual) any ideas why its dripping out? is there any known problems ie pressuring issue. I bought the machine in rough shape and only ran it around yard a lap or two before i tore it apart... the hour meter works and when i got it it showed 399hrs now its got 405hrs. any help would be useful!
-
-
I have had a few older Argo's,a couple of them did the same thing.I started to use 85-140 and make sure it is not even a little overfull.My 2003 Bigfoot will get wet (damp) with oil on occassion also. -
thanks for the reply. i used hypoc 80/90 weight. i will double check the level.Comment
-
well its got 407hrs on the hourmeter and it quit dripping(only dripped another tablespoon or so around 406hrs). it must have been just a hair overful. thanks for the help!Comment
Comment