hagen trans trouble

[riotwarrior]

Where would I obtain a kit to rebuild my control cylinders for my hagen trans.

Take one apart and take lots of pictures as u do...then you have a pattern to go by.

locate o rings at local farm supply or maybe tractor or hydraulic shop and replace them..lube with vaseline when installing rebuild and fill and bleed.

JM2CW

Al

E D I T...

Just something to consider; these machines have not been made in over 45 years, thus parts availability is pretty much non existent. There are NO parts for the Hagen, the controls are sealed with O rings, clutches can be upgraded as with engines, drive belts but the end result is there are limits to what you can get in regards to parts for these old machines...

[kghills]

There are just orings in the cylinders and caps. I got mine from McMaster Carr.


Keith.

[iron pig]

Where would I obtain a kit to rebuild my control cylinders for my hagen trans.