Adjustment tool

[Delduck]

Can someone tell me where I can look at or read about how to use the t20 adjustment tool. Just bought if From Richards.

[philipatmaxfour]

adjustment---t20

Can someone tell me where I can look at or read about how to use the t20 adjustment tool. Just bought if From Richards.

OOPS. you may get several replies advising you to not deal with Richards. He is expensive. You can adjust a T20 without the "Special" tool,but some people apparently use them. There has to be threads on the subject posted on this site.

[Delduck]

I have read the Post's but I purchased my springs and other part's from the site most of everyone talk's good about. The only reason I used Richard is he is the only one who had the tool. I've looked around but just haven't found a thread, everything is about spitting and rebuilding.

[Don]

You'll need an inch-pound torque wrench.. http:// http://www.6x6world.com/images/skid-steer-manual/skid-steer-t20-manual-15.jpg

[Delduck]

And that is what's great about this site. 1 hr and 20 min later and there's a answer thank you everyone. I'll push my luck and try one more, how about something on how to put the red spring in. I'm scared now because I read something about spinning it two clicks not one.

[Mike]

And that is what's great about this site. 1 hr and 20 min later and there's a answer thank you everyone. I'll push my luck and try one more, how about something on how to put the red spring in. I'm scared now because I read something about spinning it two clicks not one.

Check the how-to section on the home page of the forum. There are videos in the transmission section showing you how to replace the spring.

[Delduck]

Mike thank you for the info, I've spent close to 400 hrs looking at all this stuff and never new that page was there. Thanks again

[RobertGO]

I made my own adjustment tool. If you have a grinder and cut off tool it's no biggie. The only reason for the adjustment tool is to move the bolt for the plunger to move out past the keepers. Other then that they serve nothing towards the actual adjustment. As a newbie to AATV, I was like you searched this site for everything. It is a GREAT site for all your information.