how much power can a t20 take?

[gotmuddy]

I am going to be looking into motor swaps, I will likely be going with a polaris 500cc atv engine but I would like to run a 700cc inline twin. How much power will these transmissions take?

[Canadian_Zuk]

Check these out.

http://www.6x6world.com/forums/transmissions/35954-t-20-limits.html

http://www.6x6world.com/forums/transmissions/22228-t20-how-much-hp.html

[Noel Woods]

Based on my experience, I would say that a t20 is adequate for any air cooled machine out there. I can verify that an experimental machine I have is running 80hp and about the same torque, with no issues after 90 hours.
I've actually seen one mated to a Chevy Sprint Turbo motor, with 100hp, and probably 110lbs torque.

[gotmuddy]

thanks for the input. Makes me feel at ease!

[gotmuddy]

Based on my experience, I would say that a t20 is adequate for any air cooled machine out there. I can verify that an experimental machine I have is running 80hp and about the same torque, with no issues after 90 hours.
I've actually seen one mated to a Chevy Sprint Turbo motor, with 100hp, and probably 110lbs torque.

sick wheelspeed!