T-20 shifting problem

[cj_kramer2]

Hi
New to the forum.
Just bought a Hustler with a 440 kholer (wow are these things fun!)

Took it out for a spin and had a problem. I had a chain come off the sprocket. Now i can not shift the right side of the T-20 when facing the T-20. It is really hard to move the diamond shifter. Any ideas?

Thank you

[rdr]

Hi
New to the forum.
Just bought a Hustler with a 440 kholer (wow are these things fun!)

Took it out for a spin and had a problem. I had a chain come off the sprocket. Now i can not shift the right side of the T-20 when facing the T-20. It is really hard to move the diamond shifter. Any ideas?

Thank you

is the retainer bent or the shift diamond the shift diamond might have poped up some if you take the retainer off you should be ablet to thake it out and reseat it in the shift column robbie

[cj_kramer2]

Thank You for the quick reply!

I will give it a shot.( that diamond shifter is really hard to move)

[cj_kramer2]

It worked!

Thank You

Now i have a problem with the same not going into reverse. one side works but not the other side does not.

Any ideas?

Thank you:confusedhmmmm2:

[rdr]

It worked!

Thank You

Now i have a problem with the same not going into reverse. one side works but not the other side does not.

Any ideas?

Thank you:confusedhmmmm2:

it;s your diamond take it back out and turn it a little my tranny did the same thing when i rebuilt it . robbie

[Mike]

Look at the last page of the T20 rebuild article in the how-to section here: http://www.6x6world.com/forums/aatv-....html?garpg=10

Look at the 4th picture down from the top. That is what the peg on the bottom of the shifter should be riding in. Make sure it hits that channel or it will only work once.