Announcement

Collapse
No announcement yet.

T20 did something new!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • T20 did something new!

    Hi guys! I htook my supercheif on a 10 or 12 mile ride last weekend and on the way back home after a 1/2 mile through prolly 8 to 10 inch deep snow it was almost like the reverse band was tryin to grab the drum??? my laterals have about 4 inches of travel and I have the piece of brake lines over the pins to try and eliminate any slop in it. Has anyone ever had anything like this ever happen???
    I just stopped and moved sticks to and fro and took off again.
    stumped!!!
    Thanks fellas
    Dave

  • #2
    Heat build up? I've had my act weird when really beating on it for a long time.
    sigpic

    Comment


    • #3
      Originally posted by Toys4Me View Post
      Heat build up? I've had my act weird when really beating on it for a long time.
      That was my thought. I was pushing alot of heavy snow!!
      Hope it didnt do any damage?
      Laterals still the same so hopefully all is well

      Comment


      • #4
        We've had them hot enough to where you cant touch them and actually had them blow the output shaft seals out because the breather was clogged.

        Made sure the breather was clear on my new build.
        sigpic

        Comment


        • #5
          As much as you ride Dave you may want to think about a oil cooler, or just take more beer brakes.

          Comment


          • #6
            Originally posted by james gerber View Post
            As much as you ride Dave you may want to think about a oil cooler, or just take more beer brakes.
            LMAO Jimmy I did have 2 beers in my pocket in case of a breakdown!!

            Comment


            • #7
              Originally posted by dave phelps View Post
              LMAO Jimmy I did have 2 beers in my pocket "in case of a breakdown"!!
              []
              sigpic

              My new beer holder spilled some on the trails - in it's hair and down it's throat.
              Joe Camel never does that.

              Advice is free, it's the application that costs.

              Comment


              • #8
                Originally posted by Toys4Me View Post
                We've had them hot enough to where you cant touch them and actually had them blow the output shaft seals out because the breather was clogged.

                Made sure the breather was clear on my new build.
                Wow I'm goona look that over real good!! Thanks. may just switch it to gear oil!!

                Comment

                Working...
                X