Replacing T-20 o-rings

[Bushman]

I have owned a bunch of ATVs over the years and have only opened up a T-20 just to look inside before sending it off to Jerry Atkinson to have it rebuilt. My Hustler trans is leaking and it needs o-rings. I am a competant wrench but am asking those who get into T-20s often,whats it take just to replace the o-rings. I have the manuals but no needed parts list.

It to me says alot about the T-20, to have cleaned out too many ATVs suffering from mechanical neglect and have at the least of your concerns the transmission.

Bushman

[jpswift1]

Hi Bushman, you'll have to take out the drums. Once you did that you'll have room to get the bands and plungers pushed through the bores on the T-20 case. Once that is done, just put on your O-rings and make sure to install new T-20 case gaskets and you're set. Good luck with it.