More info. on this tranny

[Hopper]

Would like a little more info on this unit, Its out of a Magna, model#500120/serial#1182. Would like more info. on the whole machine if possible. I really need to know how to get the adjustments set, reverse wants to pull bad to one side.

[Amphiman1]

amphicat trans.

remove reverse loop, adjust one side plunger 1/2 turn.in.. first off. are your steering sticks in neutral when u try it?

[Hopper]

I have sticks in the neutral position and it still wants to pull. I do notice now that i have it out, that when i push loop down, the one rev. plunger has enough play in it that i can turn the pin freely, the other is tight. This project went from changing some sheer pins to a total rebuild, it will be nice and tight when done. I guess when i get more info. on this machine I will tear into it deeper. Thanks for any help.