Adjusting the T20 skid-steer

[BulletBoy]

Got the Max running - wayhey

Having a blast but the thing pulls to the left. Does anyone know where I can get information about adjusting the T20 skid-steer unit?

Cheers,

Steve.

[rdr]

Got the Max running - wayhey

Having a blast but the thing pulls to the left. Does anyone know where I can get information about adjusting the T20 skid-steer unit?

Cheers,

Steve.

probley your tires . check the tire pressure 1st make shure all are the same 2 to 4 lbs i bet that will stop it . if it is still pulling count the teeth on the center sprocket on the center axel . see if they are the same ,. also check the trany fuild , the lower drain hole is the full level . not the top ./ the t20 uses 24oz of typ f or fa trammison fuild and 4 oz of chey L/S fuild . also make shure the laterals are pushed all the way forward some times if one is not that will cause it to pull to one side . robbie

[Mike]

Robbie pretty much covered it all. Check everything he suggested first because he's right, it's usually because of different pressure in your tires (or different diameter tires at the same pressure).

If everything he mentioned is fine and you find that it's your T20 that needs the adjustment, there are lots of threads here on the site that go into great detail on how to adjust it. Just use the search. I'll get you started: Threads about How to adjust the T20 Transmission

[rdr]

thanks mike . rob

[BulletBoy]

Thanks Mike and Rob - tyre pressures have been guesstimated - bet that's it!