My 93 Max IV goes forward with no problem but in reverse the left side doesn't work but the right side works well. My question is it is possible to have 1 out of 4 bands go bad or could this be an adjustment problem ? Thanks for any help.
Announcement
Collapse
No announcement yet.
T-20 question
Collapse
X
-
Typically only one band goes at a time so that is a possibility but first check to make sure the diamond shifter is actually engaging on that side of the T20 when you put it in reverse. If it appears to be engaging fine then pull the diamond shifter out and make sure the pin is not broken on the end of it. That is more likely the cause of the problem unless you are hearing a lot of noise coming from the T20 when you are in reverse. It's an easy fix too. Search the transmission forum here for more info on the diamond shifter.
-
Quick question Jeep. In forward can you turn Left and Right equally easily?
If you loose a band for Reverse, it'll also take braking on that side away when you're in forward.
If you can't turn Left in Forward, it's gonna be the band or adjustment. I've had a pin break like Mike said, and you will loose a direction on one side.Attex 295 Wild Wolf: sigpic My Runner
Attex 252? Colt? Racer 80%: My Racer to be..... SOMEDAY
Attex Super Chief - Sold.
Comment
-
Okay that's what I will do first. It doesn't make any noise so I might get lucky on this one. Thanks much, Jeepfxr
It all seems normal in forward and turns both ways normally. I'll try these ideas and keep you posted. Thanks for the help again, Jeepfxr.....The machine never wins..
Comment
-
Originally posted by jeepfxrIt all seems normal in forward and turns both ways normally. I'll try these ideas and keep you posted. Thanks for the help again, Jeepfxr.....The machine never wins..A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.
Comment
Comment