Tweet
Hey guys, I just called Recreatives and order a gasket/oring kit. Question is, they sell five different shaft bearings, does anybody know which ones I need for a mid 70's hustler 945-HK? I imagine they're the same as the 950...?
-
sigpicBecause anything less isn't really "All-Terrain" -
well...I tried once already, so here goes again
I ordered the gasket kit for my t-20, but when I tried to order the output shaft bearings they (RI) told me there were five different ones to chose from. Problem is I don't have a clue what to tell the guy to help narrow the search... If it pleases the court, I have a 1976ish (data plate is gone) Hustler 945-HK. This little tidbit did nothing to impress the Max salemen or get me closer to my goal. So perhaps you fine people know what size I need...
Last edited by Mike; 03-28-2011, 10:08 PM. Reason: merged two threads. Please do not double post per the site rules, just bump your original thread. Thanks.sigpicBecause anything less isn't really "All-Terrain" -
For best results, Take the bearings out a measure the OD, ID & thickness. Have these measurements when you talk to RI again, Surely that will get you headed in the right direction.Comment
-
When you call Recreatives back, try giving them the serial number from your T-20 case. There should be something stamped on the "Skid Steer Corporation" tag."Looks like you have a problem with your 4 wheeler........you're missin' two wheels there"
sigpicComment
Comment