Driven Clutch Spring

[krahsb]

Anyone know where i can find one of these?

IMG_1699.jpgIMG_1700.jpg

(Preferably in one piece!)

The spring is from a first generation Attex with a BH600. The only markings I can find on the driven clutch are "Salsbury Torque Converter". The spring is approximately 6" long and 3 1/2" in diameter, pretty rusty but looks to have some red on it.

Thanks,
Bob

[krahsb]

I was able to dig up some more info about the spring.
Clutch is a Salsbury 700 Series part# 136700
Spring part# 702373
any help or leads would be appreciated.

Bob

[lewis]

Call Quality Drive Systems. He is the clutch guy.

Quality Drive Systems

Use the Phone number.

[krahsb]

Thanks for the reply Lewis, I did speak to Roy @ QDS very nice guy helped me out with the part #'s but no spring. These older Salsbury parts are getting tough to find.

Bob

[racerone3]

Ebay might be be your next best bet. A NOS spring may be really hard to find for your application. you might end up finding another used clutch and either using it, or stealing the spring.