T-20 Skid Steer Seal Kit

[ilovemy1999max4]

Does anyone know how much the T-20 skid steer seal kit is from Recreatives Industries? Thanks! Almost done with the T-20 rebuild!

[msafi65]

Gasket,seals and thrust washer kit is about $52. It comes with the two input clips that get lost at times. Hope this helps

[thebuggyman1]

If you only need the 2 case half gaskets, I think they are $4 each.

[ilovemy1999max4]

Gasket,seals and thrust washer kit is about $52. It comes with the two input clips that get lost at times. Hope this helps

That costs about what I expected. So it includes the rubber o-rings and the 2 half case gaskets?

[msafi65]

Yes that is everything, both output seals, 1 input seal all orings and thrust washers ect. Ive seen a lot of t-20s with rtv in place of case gaskets. The gaskets add the necessary clearance for the internal parts plus clean up if you ever have to pull it down again is a bear. Just use the gaskets with a bit of grease to hold them in place. Hope your back riding soon

[ilovemy1999max4]

Thanks much for the great quick responses. Sadly I will have to wait till Monday until I can order the kit since they are closed. I sent out my bands out to Transmission Crafters and it has been shipped and be here this Tuesday and I called RI and ordered a new throttle cable and fuel filter (should be here this Thursday) but I forgot to order the seal kit. Laugh out loud! I hope I get back to riding soon too! I love 6x6world.com!

[ilovemy1999max4]

Ordered the seal kit and it was $78 with shipping from RI.