clutch need help

[ERCELL]

guys were can i buy a complete clutch set for my maxII I also need the belt took my max to shop had the guys rebuild my carb took it home still will not climb took it back and they think the clutch is bad can i get any help?

[LarryW]

Shop around a little before you buy anything because there is a place that should be avoided. Are you sure you need the complete set? So your drive and driven both are bad? What motor is in it? Id call Amphibious Six-Wheel Drive All-Terrain Vehicles: MaxATVs - Call 1-800-255-2511 and try ebay and hunt around a little online for the best deal.

[ERCELL]

it has a 14 horse briggs vanguard...i dont no how to tell which one is bad is the problem

[thebuggyman1]

Post up your location. Maybe a local member will volunteer to help you out.

[LarryW]

What is it doing? If you explain what is going on we can help you figure out what is bad. First thing is make sure the belt isnt worn. The top of the belt should ride up with the top of the secondary pulley. A worn belt will make the whole drive train ratio off and you wont have much if any power.

[ERCELL]

iam in cherokee NC ......iam going to try to get my hands on a new belt just ordered new carb....clutches are doing fine had my dad come take a look at them..been working on this thing for five weeks having hard time with it ....he thinks it is still in the carb had local man rebuild the old one but dont think he new what he was doing...it surging at idle when in gear it keeps losing power like it isnt opening up all the way...

[ERCELL]

help with maxII,cherokee nc ....

iam in cherokee nc .....dont no if there is anyone who can help but i need it ...my max is not climbing at all ordered new carb and going to order new belt ...had carb rebuilt but it still not right at idle it surges bad... up hill it want open up clutches are doing what they are suppose to do i put belt that i could get from my local napa shop but i think it may be wrong belt it was a dayco hp3035..the machine i bought of a guy who let it set up for long time i have replaced all gas lines, fuel pump, oil ,trans oil and spark plugs..done all i can do the lines and carb were a wreck but did the best i could with what i got ..i love the machine and do not want to give up on it..

[racerone3]

you are probably a 2 hour haul from me (I'm in Statesvill NC) , but if you want to bring the machine over next weekend, I will do whatever I can to get it running right. I will be in Dallas TX for a race Friday night, but should be home by mid day Saturday, and will be home all day Sunday working on a few other Max II's. Send me a PM and we can work out the details

[jpswift1]

Brian will get you up and running in no time. If you happen to need parts you can get them through Recreatives or MFG Supply. Whatever you do, NEVER deal with Richard's Relics / Route6x6.

Amphibious Six-Wheel Drive All-Terrain Vehicles: MaxATVs - Call 1-800-255-2511

Snowmobile Parts, Go Kart Parts, Lawnmower Parts, ATV Parts, and more | MFG Supply