Tweet
Not a whole lot of storage in these things so I whipped up this tool box that fits behind the rear seat
-
-
Cleaned up the wireing harness and installed the relays for the Superwinch winches. In the rear I made the internal mount for the rear winch......lots of work...
I'm also running two 800gph bilge pumpsComment
-
Are you going to buy tracktuners to reduce chainwindup due to the rubber tracks?Comment
-
What Trans Gearing do you have in there? Just wondering how you will do running those wide, heavy tracks. I've never tried the Buldocs, and don't recall ever seeing a set on any machines in my area, so I'm just curious how you will make out.
RDComment
-
did you put an alternator kit on the engine while you had it out?
RDComment
-
looking good man.looks to be in better shape the my 1996 when i bought it.
where in ontario are you located?Comment
-
She came with a 40 amp alt so adding a few lights and winches should be ok. Modified the front bumper to accept the 4500 Superwinch
Comment
-
Working on rear winch mount. It is bolted though the pinch seam and custom internal mount I made. It will also have a compression strut that will be welded to the receiver hitch
Comment
-
Updating the dash with new style rocker switches from Argo. Installed the Sony marine unit I got on sale for cheap
Comment
-
Looks great. What did you use to clean the body, frame, and engine/trans?Everybody dies, but not everybody lives.Comment
-
Haaaaahaha, at my first look at this pic I thought WTF?Originally posted by XVR View PostWorking on rear winch mount. It is bolted though the pinch seam and custom internal mount I made. It will also have a compression strut that will be welded to the receiver hitch
Then I realized its the back of the machine.
Did you consider building a rear cargo rack and mounting the winch to it?
Are you against the rear rack, or just don't feel you need one for your purposes?
Looks awesome
RDComment
-
I thought about a cargo rack / winch mount but thought it would be too big and heavy.
Finished welding the bumpers and gave them a shot of paintComment
-
The top is off for the last time....I hope. Modified the heater box to run two defrost vents
This is a good look at the support for the rear winchComment
-
Great thread, love the custom bumpers and mounts
Comment
-
Top is back on and riveted. Installed the speaker box and screwed it down
Almost looks like it belongs there...Comment
Comment