Tweet
Outboard Motor Bracket
Iam looking for some pics.of Argo's mount. I think I can make my own, all I need is some pics. and measurements. I heared they are about a 100.00. Thanks for any info. Cougar
-
2011 MUDD OX KUBOTA TURBO DIESEL -
This is the only pic I got of mine right now, i still dont have a camera!
Jeff
02 Argo Bigfoot
I never get lost : I take expeditions!
I'm guided by the Magic 8 Ball.
-
Thanks Cougar2011 MUDD OX KUBOTA TURBO DIESELComment
-
Cougar, I cut a wedge on a table saw to fill the void in the upper body.. a four sided wedge.To Invent, you need a good imagination and a pile of junk. (Thomas Edison)Comment
-
2011 MUDD OX KUBOTA TURBO DIESELComment
-
Mount
mariner.JPG
motor mount.jpg
m&j.jpg
These may give you some idea of the mount, as you can see it is off center, this is a factory issue. If you want i can take more detailed pictures tomorrow with some measurements.
LewisLife should not be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways , cigar in one hand, whiskey in the other, body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!!!"Comment
-
Side Mount ?
Lewis is the side mount better? Cougar2011 MUDD OX KUBOTA TURBO DIESELComment
-
I think the reasoning is it frees up the hitch for towing.To Invent, you need a good imagination and a pile of junk. (Thomas Edison)Comment
-
So the side mount don't have a brace on the bottom of the motor? The one rear mount I saw had a brace that ran from the hitch to the bottom of the motor. It was a V shape. I was going to try and run the motor without the bottom brace first. Cougar2011 MUDD OX KUBOTA TURBO DIESELComment
-
You could still have any local metal fab shop make you a foot brace with a backing plate inside, and a mounting plate out!Jeff
02 Argo Bigfoot
I never get lost : I take expeditions!
I'm guided by the Magic 8 Ball.Comment
-
I wouldn't want to run a gas engine without the mount being tied into the hitch>argo frame. The body isn't strong enough IMHO.To Invent, you need a good imagination and a pile of junk. (Thomas Edison)Comment
-
side mount
The side mount does free up the hitch but is tied into the frame at the same location as the hitch(right hand 2 bolts as seen from rear of machine). Also if you are running a tiller type outboard it puts the tiller handle so as you sit on the bench the handle is very convenient. I took pictures and measurements on this hook-up. Are you still interested in the measurements and pics?
LewisLife should not be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways , cigar in one hand, whiskey in the other, body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!!!"Comment
-
Yes that would be very help full. Iam running a 50# minn kota with a 42" shaft, when it gets in at Wal Mart. Thanks Lewis
Cougar
2011 MUDD OX KUBOTA TURBO DIESELComment
-
Mount
100_0529 obmm.JPG
100_0530 obmm.jpg
100_0532 obmm.JPG
100_0533 obmm.JPG
100_0534 obmm.JPG
Here are 4 pics, all i could send this post. I have measurements.
lewisLife should not be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways , cigar in one hand, whiskey in the other, body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!!!"Comment
-
100_0535.JPG
100_0536 obmm.JPG
100_0537 obmm.JPG
100_0538 obmm.JPG
100_0539 obmm.JPG
One more to go.Life should not be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways , cigar in one hand, whiskey in the other, body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!!!"Comment
Comment