Announcement

Collapse
No announcement yet.

Outboard Motor Bracket

Collapse
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • #16
    Mount

    100_0540 obmm.JPG 100_0531 obmm.JPG


    Tube is 1.25 square tubing. (do not know the wall thickness)
    Bracket is set 13 inches from light.
    Square tube length is 15.25 with diamond offset.
    tube attachment flat stock is 5.25 and 90 to frame is 3.0 inches with to 5/16 bolts at hitch to frame. 3/16 steel for this part.
    Motor mount plate is 9.25 inches long with 2.50 deep to 3 point weld.
    Motor mount back plate is 4.50 inches (all plating is 1/8 steel)
    Plywood mounting plate is 1 and 3/16 inch.

    Angles are noted: first pic is to set back plate at 75 degrees with angle meter as pictured. This is a ruff estimate since i am not completely level due to the vehicle design. Rear wheels about 1 inch off ground in rear.

    Square tubing is set at 70 degrees on angle meter and welded in diamond position. I am sure you know what i mean by this.

    Hope this helps . I mound a 9.9 4 stroke on this and is pretty sturdy set-up. I am positive a trolling motor will be o.k. on this application. Good luck:

    Lewis
    Life should not be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways , cigar in one hand, whiskey in the other, body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!!!"

    Comment

    • #17
      Thanks Lewis that helps alot. I got my work cut out for me this weekend. Cougar
      2011 MUDD OX KUBOTA TURBO DIESEL

      Comment

      • #18
        Dirty machine

        Cougar, if you need anything else as far as measurements let me know.

        My machine was pretty dirty i have not had the chance to clean it up this week from the weekend ride. Just thought i would add this, i normally keep it very clean.

        Lewis
        Life should not be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways , cigar in one hand, whiskey in the other, body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!!!"

        Comment

        • #19
          Originally posted by lewis View Post
          Cougar, if you need anything else as far as measurements let me know.

          My machine was pretty dirty i have not had the chance to clean it up this week from the weekend ride. Just thought i would add this, i normally keep it very clean.

          Lewis
          If it's not dirty that means your not playing enough. Thanks for the help that should get me going. Cougar
          2011 MUDD OX KUBOTA TURBO DIESEL

          Comment

          • #20
            Outboard Motor bracket

            Cougar how is the bracket coming along?

            lewis
            Life should not be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways , cigar in one hand, whiskey in the other, body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!!!"

            Comment

            • #21
              Originally posted by lewis View Post
              Cougar how is the bracket coming along?

              lewis
              I just got my motor from Wal-Mart last night. DO NOT ORDER FROM WAL-MART. It took them 14 days to get it, I screwed up and paid for it when I ordered it. Iam going to start on it tonite. Cougar
              2011 MUDD OX KUBOTA TURBO DIESEL

              Comment

              • #22
                boat mount

                Don't forget the hitch bracket to keep from twisting the back end.

                Comment

                Previous 1 2 template Next
                Working...
                X