Announcement

Collapse
No announcement yet.

Just Ordered a 2008 Argo Avenger

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • kovac
    replied
    does anyone have a picture of the support bracket for the winch on an avenger?

    Leave a comment:


  • kovac
    replied
    How low of tire pressure can you run in the new avengers?

    Leave a comment:


  • Roger S
    replied
    My cup holder with a 42 oz. cup and 1/3 full works ok. Probably a lid and straw the way to go. The best thing you could do to the bigfoot is spend $300 on Matt's beadlock wheels so you can air waaay down. Completely different machine in ride and rubber on the ground, and drink holder stability

    Leave a comment:


  • GREASEMONKEY
    replied
    Originally posted by philipatmaxfour View Post
    .............. and removing the cup holders leaves two holes facing upwards to blow air onto the windshield.

    I have a 02 Bigfoot so......
    OK I gotta ask this? Does anyones Argo ride smooth enugh to actually use the cup holders for anything other than bottled drinks?

    I know how mine rides on smooth dirt roads, and it just aint happenin!

    Leave a comment:


  • kovac
    replied
    Went for a short ride yesterday (still working on putting together tracks) with the top on it is VERY noisy inside. much louder than my max was with a top. Has anyone put in any sound proffing to help with this. Also how do I know which transmission I have low geared or high geared.

    Leave a comment:


  • kovac
    replied
    Thanks Philip I will let you know how I make out

    Leave a comment:


  • philipatmaxfour
    replied
    Avenger--factory heater

    Kovac--All of the EFI Avengers that I have seen run very cool. They don't go over 170* F on hot summer days. They run about 130* F in cold weather.I doubt that a engine coolant heater is going to do much for you. If you look through the screen into the cool air intake in front of the radiator you will see two round pipe shapes headed toward the driver's knee. Those are the knockouts for the heater plumbing. My rad fan blows so much warm air that with the roof on we get lots of heat and removing the cup holders leaves two holes facing upwards to blow air onto the windshield. Let us know what you do.

    Leave a comment:


  • kovac
    replied
    heater

    Does anyone know where they put the factory heater in the avenger?

    Leave a comment:


  • Mike
    replied
    Were you asking about the Jim Shockey series? I didn't see that.

    Leave a comment:


  • Cougar
    replied
    Jim Shockey

    I think he ordered just a Avenger 750 EFI not the Jim Shockey Signature Series. Thanks Cougar

    Leave a comment:


  • Mike
    replied
    Cougar, look a few posts back, you just missed it:

    Originally posted by kovac View Post
    it is costing me 24k. I ordered the rubber tracks because i have read they are much smoother and better in the snow.

    Leave a comment:


  • Cougar
    replied
    Jim Shockey Series

    Has anyone checked on how much one is ? Cougar

    Leave a comment:


  • Mike
    replied
    Ok, where's the pics? You build us up, get everyone excited for you and then...nothing.

    I'm kidding, congratulations on getting it. I can't believe you didn't take it for at least a spin around the yard. I'm sure you probably won't be able to sleep tonight wanting to go out riding. Have fun!

    Leave a comment:


  • kovac
    replied
    avenfer arrived

    Just got my new avenger 750EFI. I havn't done anything yet but pull it in the garage, and start reading the manuals. I have to tell this thing looks very impressive. I looked it over and as a former max 4 owner this lookes far better biult. I have no idea about performance, as I'm sure with the true 6 wheel drive the max would probably do a little better in mud (not sure with an expirenced driver however). But as far as built I believe the avenger has the max beat hands down. Very heavy duty. I have alot of work to do putting everything together. Tracks, windshield, top, hand rails, and rear light kit. Thank god I had them put in the alternator kit. I can't wait to take this baby out.

    Leave a comment:


  • Cougar
    replied
    Thanks for the info on the tracks. I will look in to them rubber tracks. Thanks Cougar

    Leave a comment:

Working...
X