Tweet
So is it all tested and rettogo? 4 months til the debut? Are you gonna let Jennifer drive "her" machine?
-
sigpic
My new beer holder spilled some on the trails - in it's hair and down it's throat.
Joe Camel never does that.
Advice is free, it's the application that costs. -
I've got the T20 apart. I got a new 9 tooth shift collar from Matt O. and I picked up some O-rings last weekend. Hope to put the T20 back together this weekend.
I know how to drag a project out.
Comment
-
Very nice work Mike. Looking forward to seeing it at a ride!
I hear yaOriginally posted by Mike View PostI know how to drag a project out.
sigpicComment
-
Mike: I don't see any brakes in the machine, are you just using the t20 to brake the machine? Its looking like a fine build, would like to see the machine perform next to a stock Avenger.Comment
-
Just using the T20 for brakes.Originally posted by Noel Woods View Post
As for performance, I still haven't finished it. I really have just lost interest in it. I did get the T20 back together and in the machine but it's not adjusted correctly. Unfortunately, part of the tight fit of this design doesn't allow me to adjust the T20 in the machine because I can't get the popsicle sticks off the center post so I end up having to pull the transmission each time. It was a poor design but I knew that going into it. It won't be bad once it's adjusted but for now it sucks.
So that's where it currently sits, put together and running but the T20 needs to be adjusted some more. I'll get in the mood to work on it again sometime, probably the week before Busco.
Comment
-
I know what you mean about losing interest. I've got three machines in various states from torn down to partially assembled. That's in addition to routine maintenance which seems to be ongoing on the others in the fleet. I'm building a new work shop as well so everything is here and here including tools, welders, etc., and nothing is where I need it.
As big as the machine is, its amazing how much space can be taken up. Been there and done that.
I think you are still in line for a top notch amphib here. I've always liked how the t20 performed, especially with split shifters. The Avenger is really an over-engineered vehicle anyway. I may do one one of these days myself, and keep thinking about single #80 chain throughout, and maybe a 33 to 35 hp engine.Comment
-
BUMP!
No recent updates...Comment
-
-
?Comment
-
Sitting in the same place still.Comment
-
You have 2 months to make it go ( better than it does)
, it should be at the Cake point now. 
sigpic
My new beer holder spilled some on the trails - in it's hair and down it's throat.
Joe Camel never does that.
Advice is free, it's the application that costs.Comment
-
BUMP!
No recent updates...Comment
-
I haven't done anything to it.Comment
-
A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.Comment
-
Brian, I think you should go get that project from Mike and finish it for Mike or yourself....Comment
Comment