Project Bush Machine

[trevorakm1]

I really like tat cap you got there, the sliding doo is kool!

[prailleraide]

hi guys, im starting a project with my argo.

Im planning to install a G10 engine from a pontiac firefly 94 efi and will put some pictures and videos while im building here and there.

Here is the beast

argo reponse 97-2.jpg


here is the engine pulled from a donor car with everything working, i had to mess up with the starter a bit but everything is all right yet.

engine-2.jpg

engine-1.jpg

and some wiring mess on the table hehe

wiring-2.jpg

more to come

24-11-2012

A box i made for protecting the ECM, will be waterproof, and shockproof



The original G10 fuel pump from the donor car, I just cut the flange plate in half and remove the fuel sender to fit on the argo tank



Hole for the fuel pump installation



result



Hood lift modification for the G10 engine, still not done yet hehe



Here is the adapter, made from 1 piece hardened shaft



and the clutch puller here



adapter bolted on the flywheel, only 3 bolts for now :P



the clutch fitted on the engine, need a shorter bolt, 7'' should do the trick



driven clutch on the transmission



I used the original trans/engine mount that im modifying for the purpose. Lowered 1.5 '' and braced for extra strength



general view of the thing, no support done yet, Im waiting for my universal alignment tool to get this done





more to come!