Announcement

Collapse
No announcement yet.

my first 6x6 / attex build

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • my first 6x6 / attex build

    Hi I am in the process of putting all the pieces together when I got this 6x6 it was all taken apart And missing some stuff And it was parts from two different attexs so I took on a project and a half . I got all new bearings from buffalo bearing , 3 to 5 lug wheel adaptors , a nice set of used and wheels tires and front brake set up off drew. So far I sand blasted the frame and gears and axles. I painted the frame with chassis saver black and sprayed the axles and sprockets with stainless steal paint I got the jlo 400 running on the floor to my shop but dose not seem to be running right. have not been able to post pics in hear I can up load in the gallery just not hear I don't know what I am doing wrong I have most of the pic posted in there when I was working on the body And frame

  • #2
    Great job, Brian! Copy and paste the link below the picture where it says "linked thumbnail" and it should put a small pic of it in your post here.



    "Looks like you have a problem with your 4 wheeler........you're missin' two wheels there"
    sigpic

    Comment


    • #3
      OK thanks JP I will give that a try

      Comment


      • #4
        Looked at some pic's in your gallery. Nice looking project you have there. Ready for the trails at Pine Lake this summer? What sort of Chevy is up on stands in the the one pic?
        sigpic

        Comment


        • #5
          It looks like it was originally a 6-chain machine with the chain marks. The body is probably from an ST not a colt. The frame was replaced with a true 4-chain(better) frame at some point.
          l like to buy stuff and no I don't do payments!

          Comment


          • #6
            Thanks Joe it has came a long way From when I got it. That is my 1986 s10 blazer I am putting a 1988 tpi 350 and a 5 speed trans in it one of my other projects

            Comment


            • #7
              Dose 6.22$ per foot sound hi for #50 roller chain ?

              Comment


              • #8
                Originally posted by brian v View Post
                Dose 6.22$ per foot sound hi for #50 roller chain ?
                Way too expensive! Try ebay instead. Search 50 roller chain. Get a good brand like Tsubaki, Peer, Morse, or Diamond. Here's a steal on a brand new 10' box for less than $25 shipped. I'd stock up on this......

                New in Box Peer Roller Chain 50 R Ten Feet Free SHIP | eBay
                "Looks like you have a problem with your 4 wheeler........you're missin' two wheels there"
                sigpic

                Comment


                • #9
                  Witch belt would u guys recommend hp3013 hp3012 I am not sure witch one to get thanks
                  That roller chain dose seem like a good deal I am going to buy some thanks jpswift
                  Last edited by brian v; 12-19-2013, 02:33 PM.

                  Comment


                  • #10
                    Well I got the wheels and tires on it I can finally roll it around the garage IMG_20131223_173434667 - Amphibious ATV Pictures
                    Last edited by brian v; 12-25-2013, 09:24 AM.

                    Comment


                    • #11
                      Looking good.

                      Comment


                      • #12
                        Thanks . well I got the engine in and the exhaust pipe on the body was smaller than the jlo 400 flex pipe . The fuel tank all so had to be removed to clean and paint that was a pain to get the fuel tank out of there I hope it goes back in easy lol
                        I will try to post some pic when I get a chance
                        [url=http://www.6x6world.com/gallery/attex-project/p20751-engine-is
                        Last edited by brian v; 01-02-2014, 11:15 PM.

                        Comment


                        • #13

                          Comment


                          • #14
                            Very nice work, Brian. You're certainly going to be ready for Ashtabula in June. Looking forward to seeing it in person!
                            "Looks like you have a problem with your 4 wheeler........you're missin' two wheels there"
                            sigpic

                            Comment


                            • #15
                              Yes I will be ready for it is there a date set for it?

                              Comment

                              Working...
                              X