Attex project

[liflod]

I finally started my winter project this weekend. Only had to cut 2 axles to get the frame out! Hopefully the hard part is over.

[George]

Nice project Lance.

The stock G50B mount works great if you don't mind modifying the cover.

[Don]

Looks like it's going to be a nice machine, Lance. That's a unique motor mount for the Briggs.

[amphibious drew]

Nice project Lance.

The stock G50B mount works great if you don't mind modifying the cover.

I'd suggest finding or fabbing a tomahawk motor mount and getting a driven clutch off Don.

[liflod]

I'm going to modify the factory mount to lower it about an inch. The engine cover is going to be modified/replaced with something more user friendly that holds a cooler
The reversed Tomahawk clutch sounds like a good idea.

[hydromike]

The stock G50B mount works great if you don't mind modifying the cover.

I see it already has the usual "wind mod", typical of most Attex machines. Cool Superchief Lance. I have a Chief that holds an itty bitty cooler (that you already know about) but sadly, neither it or the cooler have seen much action lately.

[JoeMeg]

That's a good lookin' machine already. Can't wait to see the finished product. The green poly uppers are my favorites. Lit the heaters this morn,going to try and pull the frame out of Gizmo now. This thread just re-lit the fire under me too,lol.

[jpswift1]

I'd suggest finding or fabbing a tomahawk motor mount and getting a driven clutch off Don.

I highly suggest this as well. Drew and I both have this setup and we both have 18HP Vanguards in our Attexes and it works great. It's simple and easy to do. The engine cover won't need to be cut either. Nice project, Lance......it's good to see another green poly body Attex being built.

[liflod]

Bought a new blast cabinet from Harbor Freight this weekend. After the 2 1/2 hour assembly, I spent the rest of the time blasting rust off of parts!

[jpswift1]

Looking good, Lance! Will you have it at Ashtabula in June?

[liflod]

Ashtabula is the goal. It's a trail machine for the kids.

[liflod]

What belt are you guys using on your Vanguards? My center to center is going to be about 14.25" minimum. That's about a 49 inch OC. I looked around but didn't see any belts that long.

[jpswift1]

What belt are you guys using on your Vanguards? My center to center is going to be about 14.25" minimum. That's about a 49 inch OC. I looked around but didn't see any belts that long.

Lance,

On my Tomahawk Lil Truck I'm using a Parts Unlimited LMX1116 or you can use a Dayco Max 1116 belt.

Here's a brand new one do it, dirt cheap.

http://www.ebay.com/itm/New-Dayco-The-Incredible-Max-MAX1116-Snowmobile-Drive-Belt-/201017901722?pt=Snowmobile_Parts_Accessories&hash=item2ecd99c29a

http://www.6x6world.com/forums/attex-atvs/24885-attex-450-tomahawk-lil-truck-drive-belt-part-number-reference.html

[thebuggyman1]

Here's a 49" belt for you Lance. It's what I'm using on the blue MaxII.

HP2031 - Dayco High Performance Utility Vehicle Belt. Fits John Deere Gator HPX 2x4/4x4, Trail Gator HPX 2x4/4x4 | ATV Parts | MFG Supply

[George]

I'm using the HP2031 on the Bandolero. It's sitting on a G50B motor mount.