I am putting an old 297 together and the 21x11x8 Carlisle tires are too big. Does anyone know what tire I should use?
Announcement
Collapse
No announcement yet.
Attex 297 question
Collapse
X
-
You're right, he has all kind of clearance. It not only hits the muffler but also the muffler shield. It is sp tight you can't spin the tire. On mine I can't even fit my fingers between the top and the tread. I double checked the tire size and it is correct. Nothing has been modified on the. Machine.
Originally posted by ARGOJIM View PostIs the tire hitting the muffler?
Larryw has them on his
"Racing is life. Anything that happens before or after is just waiting."
Comment
-
His 208 has no external muffler, the first gens did have an issue with melting the rear tire if over inflated.sigpic
My new beer holder spilled some on the trails - in it's hair and down it's throat.
Joe Camel never does that.
Advice is free, it's the application that costs.
Comment
-
I'd guess the frame has flexed to the extent that the tires rub. All the Attex are prone to it, but the first gen machine's light frame tended to be even more so. Have a look straight at the front and rear of the machine and see if it doesn't look like you have excessive negative camber.Stuck in the seventies- not in the swamp.
(6) Attex, a Hustler, a Super Swamp Fox, (2) Tricarts, (3) Tri-sports, a Sno-co trike, 3 Dunecycles, and a Starcraft! ...so far
Comment
-
Hey Don, was thinking the same thing. While there is support on the bottom of the rails, there is none on the top except trans at the rear.sigpic
My new beer holder spilled some on the trails - in it's hair and down it's throat.
Joe Camel never does that.
Advice is free, it's the application that costs.
Comment
Comment