New members, introduce yourself here

[johns69]

Hi all,
My name is John and I am in Dallas,GA...just outside Atlanta. Always wanted one, never had one. I have been reading these forums forever. I ave an opportunity on a 1997 Max IV, but I really could use some help in what to look for. the 18hp BS motor had a bent rod in it, which I fully believe was from sitting and 10% alcohol. Hate that gas. It has been repaired and runs just fine...a bit of surging on idle when it is warmed up, but I think that is a jet adjustment. I drove it and it seemed jerky and hard to control...but it was my first time in a skid steer. There is some chatter just as the bands grab to a stop, which I also believe to be normal. Any help to move into the 6x6 world would be greatly appreciated!!

THX!!

[Mike]

Hi John, welcome to the forum. The chatter sounds normal. As for being jerky, it could be due to the type of terrain you were driving it on. If it was asphalt/concrete it will be jerky. Also, it could be jerky until you get the hang of driving it. Take your time and don't feel rushed to buy one that isn't everything you want. There will always be another that pops up for sale if you are patient.

[johns69]

thanks Mike. I have an EZ GO golf cart that I can trade even for the Max iv. As far as waiting, I've been waiting for 30 years. I think it is time, before it is too late!!ha! What is a decent shape Max IV, 1997, 18hp worth, any ballpark guess? Cart is worth $3500 or so.

[malibu81]

Hello. My name is Greg. I just got a amphicat and a scrambler for parts. I have been working on my mhicat for a monthe now. It drivable and all stock as far as I know. This site has already helped me on a few things.

[blazin674]

Hey everyone, My name is brandon. I am from danielson CT. I just picked up a 70's argo 6x6. It is in rough shape but it has a brand new b&s 23hp vanguard in it. I bought it because I have 4 small children and it's hard to give 4 wheeler rides one kid at a time. Now I can strap all 4 in and head out onto the trail. I originally wanted a maxIV but for $600 i couldn't pass it up.

[Mike]

thanks Mike. I have an EZ GO golf cart that I can trade even for the Max iv. As far as waiting, I've been waiting for 30 years. I think it is time, before it is too late!!ha! What is a decent shape Max IV, 1997, 18hp worth, any ballpark guess? Cart is worth $3500 or so.

$3000-$4000 seems to be the going rate for one that is in good shape. However, keep in mind that you can get a newer body styled Max IV with less than 50 hours, splined axles, beadlock wheels, etc in the $4000-5000 range. I would plan on budgeting for bearings and chain replacement. Also, the non-beadlock wheels don't hold a bead at all if you plan on riding in any serious terrain, so you may want to factor new wheels into the cost. If you're just going to be putting around the yard and going in a pond or two, it's not a big deal.

Hello. My name is Greg. I just got a amphicat and a scrambler for parts. I have been working on my mhicat for a monthe now. It drivable and all stock as far as I know. This site has already helped me on a few things.

Hi Greg, welcome to the forum.

Hey everyone, My name is brandon. I am from danielson CT. I just picked up a 70's argo 6x6. It is in rough shape but it has a brand new b&s 23hp vanguard in it. I bought it because I have 4 small children and it's hard to give 4 wheeler rides one kid at a time. Now I can strap all 4 in and head out onto the trail. I originally wanted a maxIV but for $600 i couldn't pass it up.

Hi Brandon, welcome to the forum. You should be able to get $600 worth of fun out of that Argo pretty quickly.

[blazin674]

Hi Brandon, welcome to the forum. You should be able to get $600 worth of fun out of that Argo pretty quickly.

i already have, lol is there any other places besides richards relics that carry parts for the older argos?

[Mike]

i already have, lol is there any other places besides richards relics that carry parts for the older argos?

Richard or any Argo dealer should be able to get Argo-specific parts but you can get many parts outside of Argo. Bearings, chain, axles, sprockets, etc can be found elsewhere. Any part you are looking for, start a new thread in the wanted section of the forum and see if a forum member has what you are looking for.

[johns69]

hmmm//ok. it has 26" tires so it may have new wheels. I'm not sure how to tell. I get the feeling the older, as a 97, had issues? The chains look ok,at least I think they do. not rusted or anything. what are you thinking $$? bearings and chains I mean.

thx
John

[Mike]

hmmm//ok. it has 26" tires so it may have new wheels. I'm not sure how to tell. I get the feeling the older, as a 97, had issues? The chains look ok,at least I think they do. not rusted or anything. what are you thinking $$? bearings and chains I mean.

thx
John

John, I moved your questions out to a thread of its own here: http://www.6x6world.com/forums/ebay-...ng-max-iv.html since it is getting beyond the scope of this introduction thread. I answered you there.

[Drizzle]

I live in mn i just aquired a imp kat orignal white and blue with a kohler 309cc
I got the machine for free it didnt run but got it going i am currentlt restoring the
Whole machine,i dont know much about these units and dont see much info on these
Imp kats

[amphibious drew]

Welcome drizzle,

That's a imp kadoo you have. The kadoo kid has a few of them and there a few other members with one. It's a neat looking machine.

[Drizzle]

Yea i dont know much about it @ all, it sat for years until about a month ago i got the thing going , runs great but want to switch to a newer four stroke engine what would be the biggest you think i could go? I know nothing about gear box either, ive built alot of custom atvs and other things but this thing really takes the cake, its fun and interesting to work on, i have alot of ideas for it, but no knowledge of the machine

[PT-Tim]

Hello all,
I just picked up my 1st AATV. It is a Amphicat Model 500079 Serial 4432. It has an CCW motor Model KEC-225 in it. I do not know the year it was build. Does any one know from the Model number? I am going to take it all a part, change the bearings and what ever else I find that is bad. I will change all six wheels to new style and fix up the ABS shell. I am thinking of changing out the CCW motor with a Honda 13hp. What do you think? I would like to see some pics if you have done this change. I want to change the bench set to two seats also. I am also looking for a Scrambler to fix up too. I live in Wisconsin if anyone knows of one for sale let me know. [IMG][/IMG]

[JoeMeg]

hello PT-Tim,welcome to 6x6world. I don't know much about Amphicats other than they are The Original Banana Buggies. I think the Honda is a good idea. Here is one not too far from ya.

http://www.6x6world.com/forums/aatvs-sale/30965-69-70-scrambler.html