Tweet
Hi Yotieman1, welcome to the forum. 
Have fun with your new Argo. 
Have fun with your new Argo.
-
-
new guy
hello all!
my name is rafal and i live in dundas,ontario, canada
just purchased my first 2014 argo 8x8 frontier in october 2014
i am an avid hunter and fisherman and I'm looking forward to putting my new machine through some tough terrain!
cheers!Comment
-
Hello and Welcome to this site. This is the best site out there for the 6x6rs. You will find alot of great information and lots of help if you need it. Have fun and ride safe."I'm NOT stuck, I'm just temporarily stopped"Comment
-
huligun
Hello to all 6x6 8x8 fans, I am new to this forum, my name is Sergio, I just joined last week,
have been a big fan of 6x6 8x8 amphibious vehicles
argo and max, I am from CA I have two of 6x6 max iv one for parts and one for running around as of right now, recently one of my chains ripped and it needs to be replaced, i believe its a 98 model max iv, i would like to know what size is the chain and where do i buy it and find the best deal to buy the chains for the machine, they are a bit rusty, so im thinking to replace a few of em, not trying to go to the dealer.
Thanks All
SergioComment
-
Hello to all of you, My name is Nate and I am from Windsor, ON, Canada. This is my first time using this forum and I absolutely love it. I hope I am doing this right. Just purchased a 2005 Argo avenger. I have not had much time to really look at it closely but I am sure it needs some work. Thanks.Comment
-
Hello, my name is travis and I have recently purchased an old terra tiger that I would love to restore, I have stripped it, everything is there, I would like to purchase a new motor, tires and windshield, stuff like that, where should I look first. Thanks.Comment
-
Thanks, I just bought an old terra tiger and need a new engine and things, any ideas.Comment
-
Hello Sergio, welcome to the forum. The chain for your Max should be #50 chain. If you will search the site, a few people have posted what chain they use and have had good luck with. Typically you will want to stay away from cheap, chinese chain as it will not last nearly as long as quality chain.
Nate, welcome to the forum. It's good to have you here. Have fun with your Avenger.
Travis, welcome to the site. You can start a new thread in the wanted area of the forum and a member may have what you are looking for.
Comment
-
Whats up guys im adam and I just bought a sierra trail boss any pointersComment
-
I have started my trailer project. Not sure if this the appropriate thread to post it on.
I purchased a 1990 2-place snowmobile trailer. It sat in a field for 15 years and got pretty rusted out. So, I bought it for $40 rather than the guy scrapping it. I just stripped it down, cut off a bunch of bad metal, including one of the main crossmembers underneath that was completely rusted through on both ends. Welded in new 2x3" steel beam. Reattached leaf springs with new bolts. Replaced wood on deck. This weekend I will try loading the argo. I'll take some pictures.
Only thing I am leery about is the leaf springs are a "slipper" type, c-hook or open-eye type on the back. They seem a little precarious like they could come unseated from the shackles/hangers. Hard to explain, will post pics. Might need to weld some additional plates underneath to make sure they are secure. Don't want my 1000lb argo bouncing around on top going 70 down the freeway and have the leaf spring come unseated.
I took it for a test run, the trailer was squirley above 55mpg. Is this common for a sled trailer unloaded? Maybe it just needs tongue weight.
If the trailer is stable and can handle the weight, I move on to phase 2 - adding an enclosed top.Comment
-
What's up everybody.. I'm poke .. from Indiana and will travel to ride with groups.Comment
-
What's up Adam, welcome to the forum. My pointer would be to go find some mud.Originally posted by moonball1466 View Post
No, I think you will get the hang of driving it quickly enough. Keep things lubricated and any issues that come up, just start a new thread and someone will help.
Since this is mainly an introduction thread, just start a new thread in the chit chat forum. Someone may be able to help you there.Originally posted by bluebruin View Post
What's up poke? Welcome to the forum. You should be able to find a few members around you to ride with.Originally posted by scottytow69 View Post
Comment
-
I have recently bought a 99 6x6 I have too get new tires want to keep original size just taller I have been doing some research only ones I found were the 24 x10x8 any others I don't no about?Comment
-
Howdy
Rebuilt a '95 argo 8x8 with my old man over the last year. It was a great experience. Cool to see the engineering in these machines. You know if it is on there, it has been proven from years and years of use. Used a lot of sources for parts and opinions. This place was a great one. Figured I should join. 23 vanguard that richard sells has plenty o power over the tired stock 18 command. Post some pics once I figure that part of it out. Got some questions too but I will find the place to ask them.Comment
-
eddie99hd and SJArgo, welcome to the forum.
eddie99hd, what 6x6 do you have? That will limit the size of tires you can run. If you can fit 25" or 26", there are more tire options out there.
SJArgo, this thread will show you how to post photos: http://www.6x6world.com/forums/6x6-w...-pictures.html It's cool that you were able to work on your Argo with your father. That's a great bonding experience. Your 23HP motor should make that a fun 8x8.
Comment
Comment