Inner bearing conversion

[Surfer Dude]

In the process of doing a conversion from inner bushings to inner bearings on my 97 max II that has solid pinned axles. Where I ride is mostly sandy creek beds which tends to get a lot of water inside the machine from splashing and such. The sand seems to be the main culprit of tearing up my inner bushings on a monthly basis i'm assuming. tried greasing the bushing and everything with no luck.

So the question is. Does anyone have a source for the 2 bolt inner bearing flanges and bearings for 1 1/4" axles. Whether they are 72mm or 62mm doesnt matter to me. Going to be boxing frame in shortly and need flanges for bolt spacing and such. Thanks in advance

[egoperf]

Buffalo bearing 716-874-1720. Tell them you are form 6x6world.

[Surfer Dude]

Thank you Egoperf. I wasn't 100% sure they had them there but if you say they do I would assume you know what your talking about. Thats where I get my bearings from as it is anyways and 35 minutes from my house so will work out perfectly. Thanks again