MAX IV frame re enforcement

[hawksmore]

I recently saw on this fourm drawings for frame re enforcement.
but I cant seem to find them now.
Anyone know where I can find them.
Thanks evryone for the best fourm and members on the web

[foxspoiler]

http://www.6x6world.com/images/recreatives-industries/Max-IV-Frame-Kit.pdf

[hawksmore]

Got it
thanks !!

[msafi65]

I've installed a lot of these on bent frames. Align the side plates with the top edge of the frame. I clamp a piece of angle iron up front and work off that. This gets the transmission to correct height in the frame. If you are down 1/8 inch you loose most of the rear chain adjustment. Good luck this is a very good up grade.

[hawksmore]

Thanks for the info. I am new to the AATV world. I have caught the bug!! just about finished with my complete ATTEX rebuild. and had to have another project.
I picked up a Max IV. The T-20 looks new, and the 20hp Vanguard runs very good. it has a left rear sprocket tube that needs to be repaired. All chains need to be replaced.
I drove it when I first picked it up. and I was amazed with how much flex I was feeling. The frame is not bent so I am trying to reduce flex. additionally the trans was loose and jumping around in the cradle. Other than that I am hoping to get this going soon. Thanks for all of the info.
Jim.

[tonyk72]

I plan on doing this soon. I can't make heads or tails out of the diagram. Does anybody have any pics of how this looks when complete?

[patb069]

Whats your email? I have actual to size diagrams with dimensions of each individual piece of the kit .

[rcn11thacr]

Whats your email? I have actual to size diagrams with dimensions of each individual piece of the kit .

Pat, I also would like a copy of this since im currently in the process of rebuilding my max iv. Pm send with email address, and thank you.

[dollar bill]

thanks patb i think u r also sending these 2 me

[Mike]

Pat sent his dimensions in so that everyone can have them. There are here: Max IV Frame Reinforcement Kit Dimensions I also uploaded them to our Max manuals page here: Max 6x6 Manuals

Thanks for sending these in for everyone Pat!

[freestyle7783]

Does anyone have the actual dimensions of the parts so I can get them burned out at work thanks I have some of them but none for the trans brace in front or the tube brace

[Mike]

Does anyone have the actual dimensions of the parts so I can get them burned out at work thanks I have some of them but none for the trans brace in front or the tube brace

Did you see the post before yours: http://www.6x6world.com/forums/max-a...tml#post178417 I remember seeing the front transmission brace being shown there.