Announcement

Collapse
No announcement yet.

t-20 transmission

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Plungers are leaking slightly will it turn and stop with levers pulled back if bands are bad

    Comment


    • #17
      Plungers are leaking slightly will it turn and stop with levers pulled back if bands are bad
      Yes, I believe it will turn and stop with bad bands, but it should make strange noises and have reduced power because of the metal-on-metal contact between the band and drum. It will also ruin the bands and drums to run it like that.

      Let's go back to the basics. Your original post said the clutch spins but you have no power. Tell us the recent history of the machine. Was it running fine but one day lost power, or has this problem creeped up on you? Have there been any recent repairs, adjustments or maintenance? In a previous post I suggested you make sure the bands are correctly adjusted. Have you done that yet?

      Comment


      • #18
        Don't have no history I got bands adjusted like it showed in video will try tomorrow it don't seem to make any noise turning thanks

        Comment

        Working...
        X