Originally posted by uspsguy
View Post
Announcement
Collapse
No announcement yet.
max II will not roll
Collapse
X
-
the max is home, the chains were in good shape, and it rolled out of the truck when It was delivered, I guess he had it in gear or didnt have the tires aired up enough, I lucked out on the condition . i just had to clean the points and clean out the tank and it started up and ran good.just a few more little things like fuel line and greasing the chains and it should be ready to take swimming.
Leave a comment:
-
Tell your seller to cut all the chains with a chain or cable cutter and spend the 200 on new chains. It doesnt take much of a frozen chain to stop a 6x6.
Leave a comment:
-
here are some pics of where i found the # on my max (center of frame in both pics). i think our machines are about the same vintage. my # was 4701. recreative was able to tell me that it is a 1975. red body, 340 JLO and was shipped to california from the factory
Attached Files
Leave a comment:
-
looked today for the numbers. and even sanded some on the frame under the seat on both sides. nothing. so I guess I do need a pic posted
Leave a comment:
-
ok thanks. I will look today . and call to see what year my machine is. I will let everyone know tonight if I find out anything.. thanks
Leave a comment:
-
mine were on the seat frame. pull the seat and floor out and look on the right side of the bar that the seat sits on. i had to sand all the paint off mine to be able to read the #'s. if you need me to i can post a pic of where they are on my machine
Leave a comment:
-
I got the max running and took it for a spin. I LOVE IT >> but I still can't find the vin numbers. i had some time today and I looked it over inside and out. any idea where they might be. the only numbers I found were on the plate on the jlo engine
Leave a comment:
-
Leave a comment:
-
If you will call the factory with the serial number they will tell you what the year is. They are very helpful.
Leave a comment:
-
just a update. I got a shipper to ship this max cheap. it will be here on Friday so I can actually look and see why it doesnt roll. I am excited lol and I am sure I will have a lot of questions . I would like to know the year of it
Leave a comment:
-
just cut the old one's
you will need new chaines anyhow,
just cut the old ones.
Leave a comment:
-
Hi Mike. this guy knows nothing about the Max. he got it as part of a estate and ebayed it. I will call him monday and see if he will go mess withit some and check the basic stuff.. hopefully it is something simple .. thanks
Leave a comment:
Leave a comment: