Announcement

Collapse
No announcement yet.

Need Belt Number for Kohler Command 25 HP Max IV

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need Belt Number for Kohler Command 25 HP Max IV

    Hi all,

    can anyone give me a belt number for my new to me Max IV? It's a 2003 Max IV with a Kohler Command 25 nHP engine, model 730 s. It came with two belts, one on the machine, the other a spare. but they aren't the same model numbers, width, etc. One is a Recreatives Dayco 018039 (3602 264). The other (was on the machine) is narrower and says (I think) Laser 1-42 86.

    Can anyone point me in the right direction? I've strripped this machine from top to bottom, and now I want to get out and play!

  • #2
    The Dayco sounds like the right one. Which one was on the machine when you got it?

    Comment


    • #3
      Hi Mike...I was hoping you were on tonight.

      I may be posting this reply twice, so my apologies. service cut out just as i posted my reply.

      Both belts came with the machine. I think the dayco was on it, but not sure. problem is, the dayco looks like its never been used but one tooth is split rigfht down to the belt base. I guess it deterioorated - the old fellow had the machine since 2003 but never used it.

      Frustrating - this is the only night i have to work in the garage, and this is the last thing before I can fire it up. Like i said in my missing post. this working for a living is getting in the way of living.

      Comment


      • #4
        I'm pretty sure that is the correct one. To make sure, measure the widths. The correct width for the Max IV belt is 1-3/16". I would put the Dayco on and drive around with it for now. Then tomorrow or whenever you get time before you go on an extended ride pick up a new one.

        Comment


        • #5
          And this I shall do.

          Thanks, Mike. Wifey's eyes are lighting up..finally she'll be able to get me back on the honey-do list!

          Comment

          Working...
          X