Newt the Bold project

[MAX IV Mark]

I think this matches your newt
tumblr_mjz93zKR4U1qbc3qpo1_1280.jpg
I see the design resemblance.
I think you need the same square jaw and teeth on your machines mouth.

[ARGOJIM]

Nearing a year now and no updates. No known sightings.

When is the anticipated unveiling?

[hydromike]

I brought it down to Spring Ashtabula last year to run it around a little bit and see what worked and what didn't. I've already made a couple modifications including cooling fan shrouds to vent the hot air better, and have changed the primary gearing to speed it up a bit. I've also swapped out the clutch spring to help with engagement, but it's still not where I need it to be. The CV-Tech clutch is running the heaviest weights you can run (aside from fabricating a set from depleted uranium or tungsten), and running the second-lightest spring available. One of the transmission bands went south at the plunger end so it took a little while to get that back in order. It's going to need quite a bit more testing and modification I imagine....