Ashtabula, OH Parts Swap Meet June 19-22 2014

[jerseybigfoot]

After one year when the "shower" consisted of the lake and a bar of soap......I bought one of these Shower Tent: Northwest Territory Comfort from Kmart
I actually ended up with 2 of them.......If anybody is interested in the second one, I'll bring it along.
With all the parts I'm bringing for people.....I think the new trailer will be full.

The shower tent needs a zodi water heater. I used a similar shower tent before I outfitted my trailer. Always nice to have a hot shower.

[hydromike]

20 naked people chasing a water truck with a bar of soap is one of the common sights at Burning Man.

20 people with one bar of soap? Ah, the communal life.


This'd never work at Ashtabula. When you get 20 people lined up (naked or not) and they all start to run at the same time with a common goal, somebody's going over the wall in the Sweeper, or getting tossed into the infield after somebody shorts-it on the hairpin. Ugly, I tell you.... ugly.

[tbone9]

So how are the trails there? Is there some mud and water?

[jpswift1]

This'd never work at Ashtabula. When you get 20 people lined up (naked or not) and they all start to run at the same time with a common goal, somebody's going over the wall in the Sweeper, or getting tossed into the infield after somebody shorts-it on the hairpin. Ugly, I tell you.... ugly.

Many of us have experienced this:

And the trails are very good there too. It's certainly one of the best AATV events going on.

[hydromike]

So how are the trails there? Is there some mud and water?

There's not a TON of mud when you compare it to the bottomland of Busco, but as long as it's rained a bit, there's mud. There's Pine Lake to swim in. There's a creek that transects the property, and you can run the middle of the creek for a quite a while. Some areas in the creek are deep enough to float in depending on how much precipitation has fallen. It's a nice small park.


Check out the website with a trail map here: Pine Lake

[tbone9]

Sounds like a good time. I have a spare Max IV roll cage I'm trying to sell that I can bring if someones interested.Will take any reasonable offer.It's a wrap around style with removeable racks and wind shield.

[JoeMeg]

Since this is the "swap meet" thread pertaining to June 2014 Racing at Pine Lake,I will post the items I'm looking for here.

1) I need two Attex front "Brake disc and 20 tooth sprocket" tubes. Preferably with decent teeth on sprocket,pitting/etc on disc is acceptable.

2) I need at least one (but would like two) Left side output shaft(s) for T-20. Not picky about the condition of the sprocket,I can press off and press new ones on. But would like one(s) with decent seal area (so as not to have to "Redi-Sleeve" them).

3) I would really like to get a set of front brakes,say from a Colt or other application (I'm not familiar enough with all the diff models that used the same unit's to name them). I'm using the set I have to put Gizmo back together and will be needing something to use on my other Colt.

4) And now for the biggie. I really,really,REALLY would like to find a Kohler M-18 or M-20 that's in halfway decent shape. I know it's a long shot and I'm going to start a thread in the "Wanted" section of the forum also. But,if ANYONE knows anything about the possible availability of of either,I would greatly appreciate it.

5) Oh,and also,I have two Runamuks that I would like to mount on 8" K-Lock wheels. Mudd ox/Max factory bringing any with them?

[jpswift1]

Joe, I think between Drew and I we can help you out with some of those parts.

[PlumCrazy]

"After one year when the "shower" consisted of the lake and a bar of soap......I bought one of these Shower Tent: Northwest Territory Comfort from Kmart
I actually ended up with 2 of them.......If anybody is interested in the second one, I'll bring it along."

Mike (Toys4Me) bought a shower tent last year and it works well.
It gets all the mud off you without messing up the trailers or motor home.
We used 5 gallon buckets of sun warmed water.
Find a nice grassy well drained spot for it.

[LittleG]

so what I am seeing is you all would like the shower to be operational this year i will call Bud an see if we can get that taken care of bunch of candy butts I been bathing in that lake since I was a kid an I turned out just fffffine

[amphibious drew]

Ok I've got a bunch of stuff at my place that I'm going to bring up to Ashtabula. I have a ton of Max II stuff. Pretty much everything made of metal you could think of. Also, I have some Attex stuff too including an entire colt full of good parts. I will bring as much as possible, but if you are looking for something specific, pm me. I may be able to let go of a t-20 or 2. I still need to get to refurbishing them, but I'm starting to trip over them in my garage and I can redo them at the track if necessary. I should have some parts t-20's as well, but please don't overwhelm me with questions for shafts as everyone wants them and I believe there is a waiting list of people needing them. I also have a lower half of a scrambler including the tranny and steering wheel. With that comes a complete, yet in need of restoration gotcha. I'm asking $600 for the package. I think I should be able to get rid of a few 26x12x12 terra tires with light cracking on standard rims (no k-lock). I'm sure I'll add more stuff as we get closer.

[ARGOJIM]

Should I come, will probably have for sale 2 early max II's maybe a scrambler, maybe a hustler, all projects/parts, maybe nothing if no interest.
Also have 2 parts 295-7-300's.

[PlumCrazy]

I'm looking for a big piece of black HDPE to make new floor boards, if someone has an old tub.

[amphibious drew]

I was cleaning some stuff up and realized I had a few 16hp intakes and carbs for vanguards. If anyone has a 14, they will bolt up turning it into a 16.

[wenzelr]

First time on board...just purchased an older Max II with a 14 hp vanguard twin.....By changing the carb I get it up to 16hp...is it difficult to install? Let me know how much your asking. I have relatives in Ohio who could pick it up or maybe I could pay you to ship