Busco Beach in NC October 12-14, 2012

[fmints]

Fred, what's wrong with the Hustler? Let me know if there is anything I can do to help. Do you have something else to ride for the weekend?

Thanks Brian!!

The right side chain adjusters off the T-20 is shot. I re-welded a new channel in it, but was just a few degrees off center and it didnt' work, but made everything worst. I already cut out the old adjusters and will be looking to get and install the Max IV chain adjusters that are on the center axles. I spoke to Dan67, and he's going to let me borrow his 8x8 argo, I assume, provided I bring my welder and help him fab up an exhaust for his Hustler. I'm kinda at wits-end,,, I have my daughter with me, and promised her a great time riding with great people, and then my machine broke,,,,,, go figure!!!!

If your offering a machine, I do accept, I wont ever turn down a ride, besides, it'll be less stress on Dan's machine, since he's intially offered and has always been so hospitable.

When will you and the "Fam" be arriving? My daughter Jade and I be there Thursday afternoon, with Corys wife, Mel, arriving later that night with the little ones!

[racerone3]

Yeah, it's official!! My Hustler is down for the count and won't make Busco. Thanks Dan for offering your Argo. I most definetely appreciate it. I'm leaving Ga early Thursday morning, so I should arrive at Busco no later than 1400, with my welder in hand, ready to fab up an exhaust for you, well unless my daughter make me stop a million times to use the lady's room,, either way, we'll be there that afternoon. Thanks again Buddy!

Fred, what's wrong with the Hustler? Let me know if there is anything I can do to help. Do you have something else to ride for the weekend?

[fmints]

The weather should be perfect for this weekend's ride. Looking forward to it. I borrowed a trailer for the weekend, so 2 machines are inbound. Just need to do some work on the hustler the next 2 days and finish it up at Busco.

27530 Weather Forecast and Conditions - weather.com

Yeah, it's official!! My Hustler is down for the count and won't make Busco. Thanks Dan for offering your Argo. I most definetely appreciate it. I'm leaving Ga early Thursday morning, so I should arrive at Busco no later than 1400, with my welder in hand, ready to fab up an exhaust for you, well unless my daughter make me stop a million times to use the lady's room,, either way, we'll be there that afternoon. Thanks again Buddy!

[Dan67]

The weather should be perfect for this weekend's ride. Looking forward to it. I borrowed a trailer for the weekend, so 2 machines are inbound. Just need to do some work on the hustler the next 2 days and finish it up at Busco.

27530 Weather Forecast and Conditions - weather.com

[gimmegreens336]

I can probably get one from Ken Bost and bring it to Busco. Give me the year and engine size and i will get back to you.

Would you mind, Lewis? I was going to call and have one over-nighted if I couldn't get this worked out. It's a 1997 Conquest with the FD620D Kawasaki motor. If you wouldn't mind that would be awesome. Just let me know how much and I'll have the $.

Thanks!

[lewis]

Will anyone have a drive-belt for a '97 Conquest for sale at Busco? I would like to have a spare belt but I'm not sure if I could have one shipped here before the ride.

Thanks

I can probably get one from Ken Bost and bring it to Busco. Give me the year and engine size and i will get back to you.

[jpswift1]

Is anyone from the Buffalo area going down? 6X6World member Hans might need a Max II tub brought down so if anyone has room please let him know. Thanks guys!

[Gunf1ght]

already have a class scheduled as an instructor... dang.. when is the spring rally going to be taking place?

[rickga]

Cool Brian, glad Lewis can help.

[gimmegreens336]

Will anyone have a drive-belt for a '97 Conquest for sale at Busco? I would like to have a spare belt but I'm not sure if I could have one shipped here before the ride.

Thanks

[kezef]

I will have a 6ft pair of ramps with me incase anyone needs to load anything

[racerone3]

Hey Brian. I'll see if i can help. if you have ramps i could put it in the back of my truck possibly. What is it? I am going through Charlotte on my way back to Georgia

Rick, thanks for the quick reply and offer for help. I called Lewis right after i posted and i think he has me covered. If not i may lean on you! It is a small machine ..l.l attex ish size

[rickga]

Hey Brian. I'll see if i can help. if you have ramps i could put it in the back of my truck possibly. What is it? I am going through Charlotte on my way back to Georgia

[racerone3]

Do any of the NC gang have trailer room for a machine from Busco back to the Charlotte area? I have one in NY that could be brought to busco, but no room on my trailer to get it home from there.

[gimmegreens336]

Hell yeah!

LED replacements for my halogens in the mail.

New vinyl and cushion for a reupholster in the mail. (And adding a back bench seat)

Fighting with metal fab places at the moment, quoting me $300+ for the square steel tube bends! (4 bends!)

Was hoping for a PA system with siren before Busco too but I don't know if I can get to that.

And my group got +1. Chase, George, John, Ariel on the Conquest.

Can't wait!