Tweet
What are you guys running for mufflers I have a custom home made header but it's just too loud and wanna tone the scream down. Wondering what you guys run it don't gotta be vanguard only cuz i can make anything work with a welder just looking for something cheap that will get the job done
-
Last edited by thenewguy; 06-17-2014, 05:30 PM. -
The stock Briggs muffler is about as quiet as I have heard.
-
mine didnt have one. my motor was takin from something else and put into my amphicatOriginally posted by Mike View PostThe stock Briggs muffler is about as quiet as I have heard.
Comment
-
I was meaning that you could purchase a stock muffler for yours. I purchased motors for my three ATVs without mufflers. One of them I did like you and welded up my own exhaust:
The other one pictured in the post above had an internal exhaust that was a little more restricted on space so I purchased a stock muffler from Max. The third one is an Argo Avenger. I purchased a stock Briggs muffler for it as well. They aren't the freest flowing exhaust but they are quiet compared to the custom exhaust.Comment
-
yours is a lot nicer then mine is.. i think i found something i can add to mine just dont know how loud it will be sure it will be better then the open pipes right now.Originally posted by Mike View PostI was meaning that you could purchase a stock muffler for yours. I purchased motors for my three ATVs without mufflers. One of them I did like you and welded up my own exhaust:
The other one pictured in the post above had an internal exhaust that was a little more restricted on space so I purchased a stock muffler from Max. The third one is an Argo Avenger. I purchased a stock Briggs muffler for it as well. They aren't the freest flowing exhaust but they are quiet compared to the custom exhaust.Comment
-
I didn't realize you didn't have any muffler at all. You said you had a custom header in your first post but I still imagined a muffler for some reason. I bet that is loud. Now that I understand a little better what you have, I guess you aren't looking for the quietest muffler you can find. In that case, I would go with something like what is pictured above. Several members have used those glass-pack mufflers with good results. It still gives you a throaty sound without ringing your ears like you open pipe probably does. You can hear what it sounds like in the video on the home page.Originally posted by thenewguy View Post
I'll link directly to the sound clips. Here is my Max IV with that muffler on a Briggs Bandolero motor with 30HP: https://www.youtube.com/watch?featur...QY3IlMcY#t=398 Here is another Max IV with a 40HP Al Hodge Briggs and similar muffler: https://www.youtube.com/watch?featur...QY3IlMcY#t=635Comment
Comment