Tweet
what grade of oil do you put in for the motor 16hrs briggs&stration and the trany too.and were would you get a manual for one 
And thank's Mike I wil try to do that from now on
And thank's Mike I wil try to do that from now on
-
Last edited by SweetDaddy; 02-20-2009, 10:11 PM.never will ride anything with less then 6 wheels again -
A Briggs Vanguard engine should use 1.5qt. of 10w30 oil below 40 degrees F and straight 30 weight (SAE 30) for outside temps above 40 degrees F.
A T-20 (max trans) will take 1qt. of Type F automatic transmission fluid.
Hope this helps. -
Thats Right
Yepp, Yepp What Bud Said..Comment
-
Lubricants
Might want 4 ounces of GM limited slip additive in the T-20Originally posted by wildtexasranger View Post
Comment
-
[QUOTE=SweetDaddy;34005]..................................and were would you get a manual for one
I just checked, and I believe you can download the owners manual directly from this site...... http://www.vanguardengines.com/service-support/ If you want the repair manual, you can buy it at Home - Briggs & Stratton If you have a Northern Tools by you, they should have the manual.Last edited by Jeff t-boss; 02-24-2009, 11:40 AM.It's all just nuts and bolts.Comment
Comment