So last time out I had the argo die out on me 2 times while riding once was during a steep climb that ended with me slowly backing down and having to wait it out till it would start again and i managed to drive it up the embankment with my one hand pumping the little primer under the seat. after that it died out once again on flatter surface. Today I stopped by Argo and picked up a new fuel pump as ive read its good practice to replace em. well the argo fired right up and didnt have any issues
so i look at the old pump and im not to sure how im gonna get in there to take it off it looks like its held on with 2 screws not bolts? anyways any insight is appreciated thanks guys.

Comment