Transmission question

[RandyP63]

Hi, it is my first post so I thought I would ask how hard it is to find a transmission for the attex 300. Baker finch 7000 transmission, this is my first atv. I am originally from Glenshaw, PA, and I lived only a mile from the factory as a kid. I can still remember seeing these things when they were new. Thanks in advance, any help is appreciated.

[amphibious drew]

Welcome to the forum Randy. Check the parts for sale section. I believe member flippy is selling a baker hill tranny, but I am unsure which model it is that he's got. They do pop up for sale on here so its not impossible to find one. Heck I sold one a year and a half ago myself.

[jpswift1]

Welcome to the forum Randy. Check the parts for sale section. I believe member flippy is selling a baker hill tranny, but I am unsure which model it is that he's got. They do pop up for sale on here so its not impossible to find one. Heck I sold one a year and a half ago myself.

There were quite a few first generation Attexes out there and I actually sold a Baker Hill transmission a few years ago too. Keep an eye out and like Drew said, one will pop up.

[RandyP63]

Thanks for the replies. Any alternatives?

[thebuggyman1]

Attex quit using the Baker-Hill's in favor of the Borg-Warner T-20.
T-20's are quite a bit easier to find, and are an excellent choice. You just may have to do some modifications to make it work though.

[jpswift1]

Attex quit using the Baker-Hill's in favor of the Borg-Warner T-20.
T-20's are quite a bit easier to find, and are an excellent choice. You just may have to do some modifications to make it work though.

I don't think a T-20 would fit because the first generation Attexes were narrower than the later generation machines that used the T-20.

[flippy]

I have a baker hill tranmission-its the one with no reverse-Its good to go.-I think its either a 5000 or 6000 series.Pm me if your interested-I think I will end up using my attex body as a trailer to pull the kids on the ice this year.

[amphibious drew]

No reverse is the 6000

[Don]

I'd be interested in the 6000 if Randy doesn't want it, Flippy.

Randy- I've got a 5000 that needs calipers that you can have for what I have invested (JP gave it to me). They're not as strong as the 6 and 7000 but if you're not going to use a very big engine it may be what you need.

[flippy]

ok just pm me,I already disassembled and cleaned the calipers-The 2 outer bearing caps were broke but I jb welded them-They clamp down good and tight-I replaced one bearing-Made sure the driven clutch works also.You can see pics if you go to the for sale area and look at neglected attex for sale in craigslist and ebay section $300 in chesterfield illinois-I dont know why it says illinois I live in chesterfield michigan .Its posted on detroit craigslist also