Announcement

Collapse
No announcement yet.

T20 Question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • T20 Question

    First off I was wondering what is an acceptable output shaft play? There is 3/32" of movement. Secondly the nylon cam sliders on the driven clutch, where can those be purchased? Dont know if it matters but they are for a superchief. Found these on MFG but dont know if they are the same.
    Clutch Cam Slider Shoes | Snowmobile Parts | MFG Supply
    sigpic

  • #2
    You shouldn't have any play in the output shafts. Play would have to be caused by a bad bearing, and that should be obvious because it would trash the seal and leak....Or a broken/displaced retaining clip. The clip could be the one between the seal and bearing(retains the bearing) or the inner clip that holds the shaft to the bearing.

    Comment


    • #3
      You must mean side to side play in the input shaft (the shaft that the driven clutch bolts to), correct? If so, there will be a slight bit of play, it's how all T-20's are, but if you mean play in the left or right or both output shafts, then like Jim said, there is an issue with a bearing that's very bad and about to grenade.
      "Looks like you have a problem with your 4 wheeler........you're missin' two wheels there"
      sigpic

      Comment


      • #4
        Correct the shaft you bolt the driven clutch to.
        sigpic

        Comment


        • #5
          You want that play in the input shaft. That keeps the sun gears from eating up the center plate.

          Comment


          • #6
            Ok good so what about the nylon sliders?
            sigpic

            Comment


            • #7
              Originally posted by Toys4Me View Post
              Ok good so what about the nylon sliders?

              I've had good luck with these...

              sigpic

              Comment


              • #8
                The link didn't work, damn ebay, so try searching ebay item number 260877193686

                Thanks for that link, Mike.
                "Looks like you have a problem with your 4 wheeler........you're missin' two wheels there"
                sigpic

                Comment


                • #9
                  Clutch Button Pads Link

                  Driven Clutch Buttons Cam Pad Arctic Cat El Tigre Jag Lynx Trail Cat Panther 3pk | eBay
                  .
                  Thanks JP
                  Last edited by PlumCrazy; 05-13-2013, 09:42 PM.
                  The trouble with retirement is.... I never get a day off !!!!

                  sigpic

                  Comment


                  • #10
                    Happy to help. Those are a good price. It's nice to have extras on hand since they're not that easy to find.
                    "Looks like you have a problem with your 4 wheeler........you're missin' two wheels there"
                    sigpic

                    Comment


                    • #11
                      I ordered two sets from RI yesterday and one set of these from RadCycles to compare them.
                      Definitely a must have, tool box item.
                      ed
                      The trouble with retirement is.... I never get a day off !!!!

                      sigpic

                      Comment


                      • #12
                        I think these may be the same.
                        03-357 - John Deere Clutch Cam Shoe | Snowmobile Parts | MFG Supply
                        sigpic

                        Comment

                        Working...
                        X