Tweet
Where would I obtain a kit to rebuild my control cylinders for my hagen trans.
-
-
There are just orings in the cylinders and caps. I got mine from McMaster Carr.
Keith.Last edited by kghills; 01-12-2015, 10:04 AM.sigpic
ADAIR TRACKS, WITHOUT 'EM YOUR JUST SPINNING YOUR WHEELS
REMEMBER KIDS, THE FIRST "A" in AATV STANDS FOR AMPHIBIOUS -
Take one apart and take lots of pictures as u do...then you have a pattern to go by.Originally posted by iron pig View Post
locate o rings at local farm supply or maybe tractor or hydraulic shop and replace them..lube with vaseline when installing rebuild and fill and bleed.
JM2CW
Al
E D I T...
Just something to consider; these machines have not been made in over 45 years, thus parts availability is pretty much non existent. There are NO parts for the Hagen, the controls are sealed with O rings, clutches can be upgraded as with engines, drive belts but the end result is there are limits to what you can get in regards to parts for these old machines...Last edited by riotwarrior; 01-12-2015, 12:46 PM.MUSCATEER 6x6
Kubota 14hp 2cyl diesel engine, Hagen/Rooter transmission Comet 780 Drive/770 Driven 22x12x8 Bearclaw tyres
Soon to add on a ... RHB31 Turbo..guess that would make it a
MUSCA TUR BOTA then eh?
94 F350 4x4 7.3 IDI ZF 5sp
90 Bronco..awaiting a rebuild like no other = Tons and turbo diesel
Okanagan Similkameen BC Canada
Al "Camo pants"Comment
Comment