trans problems

[falboa15]

i picked up a muskratt muscateer or a muscateer muskrat (not sure which i have) anyways It has two sticks and two peddles. the peddles work and one stick works. the machine went forward ok and back very good. She only turns right. Nothing to the left. I pulled the trans and found the stick that did not work has a missing friction like material(like from a clutch). some parts were laying in the atf fluid. any idea what friction like material is called. THe setup has a plate,friction material,gear, friction material, plate. mcmaster has this brake and clutch lining. McMaster-Carr
anyone have any idea what that material is called or have any info on the machine. thanks

[Amphiman1]

It is called ASBESTOS brake lining.....did u remove the trans? or just the top cover? .....Sell me the darn thing before you go crazier,LOL
Yes i have one too and a muscat 8x8
Got picts?

It's called a muscateer , the origional decals have a picture of A similar picture to one of the three "Muscateers " on them......

[falboa15]

if anyone has problems with a material like this go to this link and get the size brake and clutch lining required. the stuff worked great!
McMaster-Carr

[LarryW]

if anyone has problems with a material like this go to this link and get the size brake and clutch lining required. the stuff worked great!
McMaster-Carr

Glad to hear it worked good. Please post some pictures.

[falboa15]

i will sooner then later i kinda fell off the face of the earth
it does and have a new 13hp power plant

[LarryW]

i will sooner then later i kinda fell off the face of the earth
it does and have a new 13hp power plant

Sweet, is it a Honda or a Chinese copy? My 208tt is running a powermax 16hp Honda copy. For the most part its a pretty good motor. Real cheap too. Always starts no mater how cold it is. My brother has some 13hp Chinese in his crazy colt. Its really the same thing as my 16. I don't really even see a power difference.

[Amphiman1]

muscateer

if anyone has problems with a material like this go to this link and get the size brake and clutch lining required. the stuff worked great!
McMaster-Carr

the drive discs are the same in an older bolens? walk behind tractor, i think? i'l look it up when i get a chance ,,,,,,,,,

[falboa15]

pictures are in my profile not sure how to post here

[6X6]

There's a line under each picture that says "Linked Thumbnail" just copy that and paste in the post, and you'll get a thumbnail linked to that photo. Took me a little while to figure that out myself . Anyway, looks nice, you sure did quite a bit to that machine.

[falboa15]

thanks

thank you and i did a lot and i cant wait to finish it

[LarryW]

thank you and i did a lot and i cant wait to finish it

Your work shows. Looks great. I also cant wait to see it finished.

[Amphiman1]

muscateerssssss

Oh goody, then we can be the two muscateers......

[Toyman]

Muscateers

Oh goody, then we can be the two muscateers......

Then the Toyman produces one and now there are "Three Muscateers"

Mine will more than likely begin a transmission restoration today. I'm going to test drive it one more time following my attempt to adjust it properly. Previous owner had been into it and altered the settings.

[Amphiman1]

muscateers,,,,

We'll see.....

[falboa15]

the 3 Muscateers or something like that