pulled the trigger on a conquest

[North Country Tough]

anyone here try running different size tires on their argo?talked to a fellow that runs 22"-24"-22"-24" starting from the front.might be a solution to my tight tire situation.

Wanna hear a real pi@###,while sitting in the shop tryin to medicate this mean innisfil cold I mysteriously contracted,I sat here thinking that I might not have big enough tires yet,aint that something.LOL NCT

[plott hound]

ooppsssy,sorry bud.didnt want to infect you,thought i was healthy.

[plott hound]

i got the engine almost re-assembled.just waiting on some valve seals.

[North Country Tough]

Find anything scary in there or pretty straight forward?

[plott hound]

blown head gasket,govoner grenaded,little scoring on the cylinder wall.nothing major.

[North Country Tough]

REPORT!!!!!!!!!!!!!!!!!!!you been playing hooky from work Plott,hows that Conquest coming?

[plott hound]

the engine is pretty much back together.just have to rebuild the carb and pull the starter apart and clean it.hope to start pulling axles on sunday.

[plott hound]

heres 2 more pictures

[North Country Tough]

Nice job Plott looks good,keep the pic,s coming,how is the tub and have you opened the transmission for a boo yet.

[plott hound]

transmissiion seems fine,nice and tight.tub looks to be good as well.cant wait to actually drive this sucker. wish i would have grabbed some more hardware from you.need to buy the long bolts for the bearing extensions.

[North Country Tough]

Yea Bud kinda thought you should have loaded up while the gettin was good,had a couple more fellas thru since and relieve me of some goodies,gotta start amassing Attex pieces parts and get on board with the Attex guru,s times tickin by and soon another AATV in the N.C.T camp.TTYL

[plott hound]

got my engine and trany all bolted up to the power pack frame.man the linkage plate is a real pain in the buttocks.

[North Country Tough]

got my engine and trany all bolted up to the power pack frame.man the linkage plate is a real pain in the buttocks.

Not sure what ya all mean by linkage plate?

[plott hound]

ok smarty pants how about"control panel assembly"

Not sure what ya all mean by linkage plate?

[plott hound]

so now i got all the chains off and the idler shafts removed as well.my idler shafts have no retaining rings to limit the movement of the sprockets.are they supposed to be "free floating" or is the set screw supposed to be used?