Wow parts sticker shock $$$

[countrycummins99]

why do you think the axle needs replaced?

[thebuggyman1]

spot welding is the only way the sprockets will not move EVER. Steve

YES, even when you need to get it back apart.

Guys I only welded it because I knew the axle was going to Need replaced along with sprockt when I cut and remove this winter was putting new bearings in it. Thx

An enlarged hole does not mean an axle is junk. The hole can be drilled in another location. Read this post on Body Bound Bolts http://www.6x6world.com/forums/attex....html#post1079

[snake stomper]

Thax I will read the artical and look at other solutions. Thank for all the advice. I do try to search for some answers. But with out posting on this forum There's not much resource out there

[amphibious drew]

Thax I will read the artical and look at other solutions. Thank for all the advice. I do try to search for some answers. But with out posting on this forum There's not much resource out there

We are here to help. Most active members post frequently, and to maintain correct information given out, we will and should correct improper service techniques and in accurate information. No one should take it personally unless they are personally ridiculed.