Vendetta high performance AATV tires by Mudd-Ox

[mightymaxIV]

16 Vendettas

CAM00150.jpgCAM00151.jpgI just got back from a trip to Houston Texas a couple of hours ago, while I was gone my 16 inch Vendettas arrived via UPS, my son picked them up at the UPS terminal yesterday, as I soon as I got home the Argo tires came off and the 16" Vendetta tires went on. The tires are beastly looking and look as if they will go anywhere. My Max with spacers and the Vendettas sets almost 63 inches wide and has more ground clearance then I had with the Adair tracks. Will they beat out the tracks? I doubt it but it will be fun testing them. Tomorrow I will be at the Big Nasty ATV park mud and swamp testing the MaxIV and the 16" Vendettas. Any one in the area is welcome to meet me and run through every nasty mud hole and swamp area we can find. Yes of course , video will follow. The second photo has 16 inch Vendettas on the left, Adair 16 inch tracks on the right.

[fmints]

Then build "her" a new machine.

Funny that you said that! I rebuilt my Hustler and she was favoring it a lot,, she always wanted to kick me out of it. Now that I her Max IV is a fresher build, and faster, with a single seat,, I may not ever get behind the sticks. Hummmmmmmmmm!!!!!!!! If I put a bigger engine in the Hustler,,, maybe she will favor the Hustler and leave the Max IV to me????? Naw,, I doubt it!!!! I'll figure something out

[Mike]

I might do what admin Mike did, and take over my wife's MaxIV, lol!!!

Then build "her" a new machine.

[fmints]

Fred,
Have you checked the diode wire between the coils? If the diode failed your engine can be running on only one cylinder.

Thanks Mike for the advice. It turned out to be the coils. Old age and the new technology of the e3 plugs, played at part in my coil going dead. I took a coil off of a spare 18 vanny, and immediately, the problem was fixed. 6000 revolutions per minute on a freshly built SuperTrapp exhaust makes beautiful music. I might do what admin Mike did, and take over my wife's MaxIV, lol!!!

Again, thanks for the advice.

[hydromike]

Fred,
Have you checked the diode wire between the coils? If the diode failed your engine can be running on only one cylinder.

[fmints]

We'll Fred my phone hasn't rang lately,the max 4 is ready to go, let's go play in the mud!!!!! Norm....

I know buddy, I recently discovered that I have one maybe two bad coils on my wifes MaxIV. Cory and I went for a small shake down spin on Monday, and the max was firing on 1 cylinder. I cleaned the carb, adjusted the valves, and checked the timing,, so its either mthe e3 spark plugs (i read that others had the same problem with the e3 plugs) that I'm using or ignition coils. Im going to try some basic new spark plugs today. Hopefully this works,,, if not then it is definetely the ignition coils.

[Normable1973]

We'll Fred my phone hasn't rang lately,the max 4 is ready to go, let's go play in the mud!!!!! Norm....

[fmints]

I just order me some new 12"k-locks from muddox talked with jeff he seem nice.and easy to deal with. I have a new set of super swampers.and now they have 16" wide tires!what rims are they using do they have 16" k-locks?guess ill need to save up for the 16" tires.its a good thing im divorced.or I would have to get a different hobby!

My wife ordered me 4 new 12''k-locks last monday from muddox as well. I received them on thursday of last week. I wasn't even expecting them until monday of this week. That was some very fast shipping to my Georgia residence. I mounted them on my Hustler already. I can't wait to go and get them dirty, and to be able to have a comfy ride with 1.5 lbs of air pressure. I bought 2 k-locks last summer and mounted them on the rear. The front 4 (orginal) Hustler rims would always break bead with my driving style. So now I have 6 new 12''k-locks that are sure to allow me to push my machine to more crazy limits. I sure you would be getting your rims very soon. Muddox do great business!!

I dont know if they have 16''k-locks or not, but I would thing that you could still mount them on the 12's, and then add spacers, I guess?!?!. You might have to give Muddox a call on that to know for sure.

[millerperf]

I just order me some new 12"k-locks from muddox talked with jeff he seem nice.and easy to deal with. I have a new set of super swampers.and now they have 16" wide tires!what rims are they using do they have 16" k-locks?guess ill need to save up for the 16" tires.its a good thing im divorced.or I would have to get a different hobby!

[Normable1973]

Checked prices on the vendettas, $250 for tire and k loc rim. Pretty high but seeing how they worked on Keith's max 4 makes them seem worth it... You think? Norm...

[Normable1973]

Sooooo these tires are now avail? I was getting ready to order a set of mud bugs but I really like these. Guess I'll call Matt tomorrow.. Norm...

[trevorakm1]

Looking foward to some mightmaxIV videos. Haven't seen any since the frontier left.

[mightymaxIV]

Ahhhhhhhh, can we stop the bickering here.
My 16" Vendettas are on the way and I am totally excited about owning the newest design in AATV tires. I'll have them on my Max soon, I'll also have the machine and tires at the next Busco event. Who ever wants to judge the performance will get a first hand look at what they can and can't do. As for me, I want a smoother ride, less PSI, good swim speed and hopefully good mud performance. I have waited a long time for a good AATV tire and I believe this is it, if it's not perfect, well nether are a lot of other tires, but at least this should be a good over all compromise.

Now let's all enjoy our machines and take joy in what every tire and machine combination can accomplish

[George]

My job is done here.

[kghills]

Jp and George. Have you ever noticed how your posts have like nothing to do at all with the subject of the thread. I mean I can see a little deviation now and then but you boys just seem to go off in directions I can't even herd back in
I'll try this: first you say I don't spin the Vendettas fast enough now you claim all I do is spin. Make up your minds. Since I can now do Magic I will request Mike magically remove your irrelevant posts, no wait leave them because it to brings even more attention to the thread. Good job boys without your help the thread might die. You sure your not on the Mudd-Ox payroll?

Keith,

Don't forget to cite the source of your rebuttal.

I'm bi-winning. I win here, I win there.
Charlie Sheen

Read more at http://www.brainyquote.com/quotes/au...t43M13LVvZf.99

Keith.