bead lock wheels

[ken white]

What size rim(s) are you ordering for?

Do the kits come with the bolting hardware?

Is the inner ring smaller in diameter than the outer ring?

Does the inner ring install require the rim lip to be modified or just prepped and welded to it?

Thanks,

Ken

[smudvapor]

The rings are for the 21x11x8 rim.

These are only the rings, no hardware.

The rings are the same size.

All you do is just prep and weld.

What size rim(s) are you ordering for?

Do the kits come with the bolting hardware?

Is the inner ring smaller in diameter than the outer ring?

Does the inner ring install require the rim lip to be modified or just prepped and welded to it?

Thanks,

Ken

[ken white]

So, its for an 8" rim.

My rims are 12" so I'm out.

Thanks for answering all of my questions.

[kghills]

Diagram for 12" wheel bead lock rings.

Again, the dimensions can be tweaked to fit the specific rim you are working with.

Helpful hint: You can nest an 8" bead lock ring inside the 12". That's how I do it.

Keith

[Nubs]

Helpful hint: You can nest an 8" bead lock ring inside the 12". That's how I do it.

Keith[/QUOTE]



I've had good luck with that...

[ken white]

...Helpful hint: You can nest an 8" bead lock ring inside the 12"...

Why? What would be the advantage, if any?

Keith, thanks for the diagram,

[kghills]

By nesting the 8" rings inside a 12" ring the material for the 8" ring is free. Just a more efficient use of material. I always make both together even if I am only after one size ring.

Keith.

[ken white]

By nesting the 8" rings inside a 12" ring the material for the 8" ring is free. Just a more efficient use of material. I always make both together even if I am only after one size ring.

Keith.

You're comments refer to cutting them out on a plasma table then.

I thought you were inferring that the 8" ring should be welded to the 12" ring...

[kghills]

Yes, just for cutting.

[smudvapor]

So far I have orders for two sets. Is there anyone else before I place the order? I plan to do it this week. Thanks

[riotwarrior]

As much as I would like to buy these, the damn exchange right now is ridiculous and add shipping it would be more than likely over the top.

Sorry to have made you gone to the effort its just to $pendy for me at this time. Sadly the project will have to wait until we are further away from Christmas season....

[smudvapor]

Anybody else want bead lock rings before I put the order in? If you are on the fence remember that if I have them made later on the quantity is low than the price will be higher. I have a total of three sets ordered so far. Please let me know by Wednesday night, I will be putting the order in Thursday. Thanks.

[riotwarrior]

The other post went off topic and I want to make sure that those of you who want rings get the information because I don't want to get stuck with a bunch of rings and be out a bunch of money.

The price for a set of rings to do all 6 wheels with tax is 141.85. Six would have smooth edges for the outside and six would have scalloped edges for the inside unless you tell me otherwise. This will cost me a little bit so if you could pay in advance I would really appreciate it.

Please contact me and let me know what you are interested in so I can get a good, clear count so no one is disappointed for being left out of the order. Thanks.

Wow...this is a quote locally to me for a set of 6 bead locks = 12 pieces and 6 rim stiffeners plain...

You'd be looking at $550 to get all that cut out. That includes giving some $$$ to Godzuka for making up the file needed for cutting [cheers]

Forcket me that's just absurd.

Looking like missed the boat on this one....Doh!