Hello all,
Working on my st400? Attex. I have another post asking for help identifying it. Anyways, this is a major overhaul project that i know...
19 results in 0.0066 seconds.
-
T20 reassembly help
-
T20 service in northern Ontario
Does anyone know of a good mechanic experienced working on T20? Need seals o-rings and gaskets replaced. Am in Timmins.
Shorty -
Center Gasket Dimensions and Diagram ( if it helps anyone )
Hi All,
I got some new gaskets but they weren't in the greatest of condition and they seem pretty thin, so I was wondering if anyone ever... -
Urgent: T20 brake bands
In urgent need of T20 brake bands for my Max IV, Broke one during McKinley fire evacuation, in Willow Alaska. Now need machine for clean up before winter... -
T20 assembly help
Assembling the t20 but when placing the center plate it won’t sit flush on the clutch side against the case and gasket. About 1/4 “ raised. Not on... -
Max II new owner and problems
Hey guys just picked up my first 98 max II. It has a problem I need help diagnosing. When I pull back on the levers to turn or apply brakes it has a sort... -
T20 has FWD-Nuetral and shifts to reverse, but will not go in reverse.
I recently purchased a Max II and managed to get it running after sitting for more than 10 years. It was taken apart when I got it so I have no information...Last edited by Kevin Stone; 02-03-2019, 04:31 AM. -
T20 From a Working Attex
I have a good working T20 Transmission from an Attex. It includes brake disks and driven clutch. $900 OBO Located in Elizabeth City NC. Shipping possible... -
T20 jumping out of forward gear
I have an old style T20 that won't stay in forward gear. I know that the Carrier drum is bad and have included a picture if it. The planetary gears wore... -
T-20 catastrophic failure
Hey everybody, I had bought a new to me 2003 Max IV in October. The machine was in good condition but ran rough, I cleaned and rebuilt the carb and it... -
Redesigned T-20, T20-M
Hello Folks,
I have completed the preliminary design for a new T-20 tranny that is more robust, easier for the layman machinist to manufacture...Last edited by shawngray66; 11-28-2016, 03:56 AM. -
Transmission
All
I am working on the final design of a sprung 6x6 ATV. You can see it on Grabcad under Cadman. I have the funding for the prototypes... -
Max IV new guy, minimal reverse movement before lockup
Hey everyone, I decided to join this forum since I picked up an older Max IV 16hp aatv a few weeks ago.
I am mechanically inclined, and like to... -
Bands Twisted 360?! and Center plate evaluation
I'm in the process of tearing into my T20 (1977 Build) and I take apart the first half and everything looks generally ok... some delamination of the bands... -
Transmission Fluid?
I have a 1996 max iv, I'm about to attempt to change the transmission fluid and need to know what kind of transmission fluid to put back in. Any help...