pulled the trigger on a conquest

[plott hound]

start a thread there albertarider.lets see those step by step pictures.

If you want to see what your machine looks like when its completely stripped down, check out a few pic's I posted in the photo gallery. I've been plugging away on the overhaul for about 5 weeks off and on, I have to say, there is a lot of bolts to one of these units. I am completing the wiring today and should have the beast running by this afternoon....the appolstery lady hasn't finished the seats yet (Monday) so I may have to test drive it using a stack of rags for comfort.lol.

[plott hound]

son of a gun!im almost done,everything assembled but i got no spark.must have a wire off somewhere,gotta go over everything in the morning.

[Dan67]

how about some teaser pics of the conquest like to see how it's looking..

[plott hound]

will take some tomorrow dan.

how about some teaser pics of the conquest like to see how it's looking..

[plott hound]

ok still no pictures,too damn frustrated at this moment lol.still cant figure out why i have no spark.pretty sure its something simple like a wire in the wrong place.number two coil (closest to driver)has a black wire on the mounting bolt,i kind of think that is the culprit.can anyone take a look at there conquest and see if its the same as mine?its a spade connector.

thanks

[plott hound]

upate:checked everything again and found a blown fuse.replaced it and now have power to both coils but still no spark.removed the ignitor and checked it as per kawasaki instructions and discovered that it is toast.pulled a dumbass move somewhere along the line.

[North Country Tough]

Further update Plott the fearless,ready for a test ride and there haven't been much pics lately.NCT

[plott hound]

bud im so pissed at myself for frying the igniter box i have taken no pictures.however i did work on the machine today after i got the garden planted.promise to put some pictures up tomorrow.

[North Country Tough]

bud im so pissed at myself for frying the igniter box i have taken no pictures.however i did work on the machine today after i got the garden planted.promise to put some pictures up tomorrow.

Perhaps with your anger issues you should rethink what you should be planting.NCT

[plott hound]

sorry,vegetables only.no magical garden section.

Perhaps with your anger issues you should rethink what you should be planting.NCT

[Bazooo guy]

Cdi ignition is great when it works but a pain when it doesnt......make sure all your wires are in the right place or you could fry the new one...

[plott hound]

i agree bazooo guy,ive triple checked all connections so i must have shorted something before i ripped the machine apart.sometimes a simple"boost" will blow these CDI's.anyhow should get the new one for next weekend and make the machine go vrooom vrooom!here are a few more pictures.

[foxvalley]

Looks like all your hard work is soon to pay off.

[North Country Tough]

Yowser lookin good Plott,gotta love that tranny drain,and wow thats one nice winch on the nose,good work.TTYS NCT

[foxvalley]

Need to to know more about the winch, looks like a monster.